wet hands offer less resistance than dry hands. therefore there's more chance you'll get electrocuted!
Because water &our hand are good conductive medium,which can conduct eletricity easily due to the induction in the electricity.Which causes to dead
because youll get shocked you goofy :D
Because water is a conductor, and water dripping from your hands may drip down to an energized circuit, and effectively create a trail from that circuit to your hands, causing you to get electrocuted.
to prevent the cooker or chef from burning his or hers hands.
Water can conduct electricity ( if it is an electrolyte, as most tap water is) so you shouldn't touch electrical appliances with wet hands, or put them near water in case the water completes a circuit from the appliance, resulting in a live circuit. if you touch a live circuit that could result in electrocution.
Wires and components can still hold a charge. Or, if defective, a component may give an electrical shock. Therefore, it is always best to unplug the appliance first and make sure your hands are dry.
Salts and other minerals. Pure water is not conductive.
Water is a good conductor of electricity. A person with wet hands touching electrical appliances get a shock.So it is dangerous to touch an electric appliance with wet hands.
why shock occurs when electrical appliances are touched with wounded hands
Because water is a conductor, and water dripping from your hands may drip down to an energized circuit, and effectively create a trail from that circuit to your hands, causing you to get electrocuted.
to prevent the cooker or chef from burning his or hers hands.
electrical
maybe you will get electrocuted?
Water can conduct electricity ( if it is an electrolyte, as most tap water is) so you shouldn't touch electrical appliances with wet hands, or put them near water in case the water completes a circuit from the appliance, resulting in a live circuit. if you touch a live circuit that could result in electrocution.
Water is a cheap source of generating Electrical Energy, But touching any electrical appliance with a wet hands is very dangerous because water is a very good conductor. so yo may have shock if you touch.
Wires and components can still hold a charge. Or, if defective, a component may give an electrical shock. Therefore, it is always best to unplug the appliance first and make sure your hands are dry.
When handling electrical equipment be sure your hands are dry.
Electrical installations should be inspected, tested and maintained regularly to ensure safety.Don't try to repair or install electrical wirings or appliances yourself unless you are a registered electrical worker.Don't use adaptors, plugs or extension units that do not comply with regulations.Avoid poor contacts when using plugs, adaptors or extension units and watch out for signs of overheating.Don't overload adaptors and socket outlets.Don't touch electrical appliances, sockets or switches with wet hands.Socket outlets installed inside bathrooms must comply with Electricity (Wiring) Regulations.Fixed electrical appliances should be installed by registered electrical contractor. Don't use electrical appliance with an exposed conductive part which is not earthed.Don't use defective appliances.Don't place the flexible cord of electrical appliances close to any hot object.Allow sufficient space for ventilation to prevent electrical appliances from overheating.Try to switch off electrical appliances especially those high current demand ones before leaving your premises.Unplug appliances if they will be idle for a certain period of time.If appliances operate abnormally or if there are signs of overheating, stop using, switch off power and arrange for inspection and repairs by qualified persons.
because the water from your hands conduct the electricity and will probably electrocute you