It is necessary to to adjust the the clutch actuation system to set up the correct free movement when replacing any of the clutch components
suck is off
to set up the correct free movement when replacing any of the clutch components
This has a dual mass flywheel and hydraulic system so you are unable to adjust the clutch.
There is not any adjustment on this clutch. Al you have to do is bleed the system.
The clutch is auto adjusting hydraulic system :-)
The 1980 Camaro does not have a clutch adjustment. If the clutch is not operating right, then there is something in the clutch system that is failing.
the clutch system is self adjusting no adjustment can be made . check the clutch master cylinder reservior
You cannot adjust the clutch. It is hydraulic, with a master cylinder and slave cylinder in the transmission. Their are no adjustments. Make sure system has fluid and no leaks.
You can't, It is not ajustable.The clutch slave cylinder may be bad CHECK. could have air in system. BLEED system are the clutch parts are worn out. Replace clutch parts and TURN flywheel.
you can't its hydraulic, if the pedal feels weird just try bleeding the clutch system
YOu need to blead the system .. then it should require no adjusting
Clutch is not adjustable. I would recommend changing the brake fluid in the clutch system and bleed the air out of it. If it continues to cause problems, rebuild the clutch master cylinder. Bob