0
Because even though it is safer than other flames it is still a flame and it can burn you.
It is so called the "safety flame" because it is visible (yellow) and so we have a visual reminder that the Bunsen burner is burning. Compared with the usual flame (blue) which is hard to see.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
What do you do to a Bunsen burner to create a safety flame?
you make sure that the nosel is covered otherwise it wont be a safe flame
What type of flame is used for heating in Bunsen burner?
The yellow flame is considered a safe flame. If you are using the Bunsen to heat you would open the air vent so the flame turns blue, try heat on a yellow flame and it'll end up covered in soot.
What is a lab burner?
A laboratory burner, enables glassware (safe to be heated) containing chemicals or any liquid or solid to come to a boil or a certain temperature.
Is it safe to heat a flammable liquid sample in a beaker over a bunsen burner?
The flammable liquid will catch fire. That can be dangerous. Answer "no".
Characteristics of luminous flame?
Non luminous zone is the zone of a flame which is also the hottest zone of the flame as it is mostly in contact with oxygen. It is also called invisible zone.
What do you do to a Bunsen burner to create a safety flame?
you make sure that the nosel is covered otherwise it wont be a safe flame
How do you be safe using a Bunsen burner?
how to be safe using a Bunsen Burner:1. never leave the flame unattended... especially when on the blue flame.2. always wear safety glasses.3. don't heat up anything metal because they will get very hot.4. don't let young children near the Bunsen burner when it's on.5. always have someone watch it.6. turn the gas off immediately when the flame goes out.
Why is the sliding collar on a bunsen burner also a safety feature?
it is safe
What is a Bunsen burner striker used for?
It produces a spark which ignites the gas.
Bunsen burner parts?
A normal Bunsen burner has a chimney which contains gas, a collar to adjust the air hole, a air hole that will leak gas, a gas tap that provides gas to the burner and the rubber tubing leads gas to the burner.
What type of flame is used for heating in Bunsen burner?
The yellow flame is considered a safe flame. If you are using the Bunsen to heat you would open the air vent so the flame turns blue, try heat on a yellow flame and it'll end up covered in soot.
How do you conduct a flame test?
Bunsen burner Piece of wire with a loop on the end Colour chart Undergraduate student Fire extinguisher (just to be safe)
What are each of the different coloured flames used for on a Bunsen burner?
Yellow safety flame - Safe becasue you can see it easily and know it is there. Not used for heating because it creates soot.Silent blue flame - Used to for gental heating and is silent and not very visible.Roaring blue flame - Strongest heating setting and is made of two cones. The outside cone is the flame and it is blue , the inside cone is unburned gas that is purple.All credit goes to another user to wrote this on a different conversation.
Why is it fairly safe to use a bunsen Burner to heat a solution that gives off hydrogen gas?
Bunsen burner is not used to obtain hydrogen.
Function Bunsen burner?
A Bunsen burner focuses a lot of heat straight upward, instead of outward. This allows you to heat something up at close range without your hand or anything else getting too hot. Most Bunsen burners have a valve that controls gas flow and adjustable vents where you can control the amount of air that feeds the flame. Bunsen burners are a safe, practical way to apply heat in a chemistry lab.
When would you use an open and closed flame?
The closed flame (orange) is only ever used when turning on the bunsen burner or when you are leaving it for any amount of time to insure the safety of your class mates. The open flame (blue) is used at all other times. Please note it can be hard to see the blue flame so it is important that you stay aware and safe as it is often as hot as 700oC.
What are the functions of flames produced by a Bunsen burner?
A Bunsen burner is designed to produce a focused, hot flame in a way that radiates heat up, and not out. This means it is very useful for heating up a small sample of matter (like in a test tube), but for it still to be safe enough to handle in close quarters.
