0
Because you can't flip pancakes with a toilet brush, silly.
Seriously, a screwdriver must be made of a material strong enough to withstand the torque necessary to overcome the friction between the screw threads and the material into which it is being screwed.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
How do you make a screwdriver into a magnet?
You just stroke it in the same direction a few dozen times with just one pole of a powerful permanent magnet.The screwdriver must be made of of iron or steel: it won't work if the screwdriver is made of something like brass, aluminum or plastic because those materials are non-magnetic!Lots of people try to make a magnet using both poles of a horseshoe-shaped magnet but then it won't work as well because the second pole of the magnet will reverse the magnetising effect of the first pole.All you have to do is keep stroking the metal with just one pole of your magnet, pressing hard and always going in just one direction only and then pick up the magnet at the end of each stroke.Stroke the metal over and over like that with just one pole of your magnet until the metal of the screwdriver gets magnetized enough to pick up other pieces of metal, like a smaller screwdriver or some metal paperclips.But be sure to to try your magnetized screwdriver only on other things that are also made of a magnetizable material such as steel.
How can someone tell if a screwdriver is insulated?
A screwdriver can be considered to be insulated when the handle is constructed from a dielectric substance, which has very high resistance to electric current. This will typically contain two layers of material separating the user from the metal shaft. The metal shaft itself will be covered, as well as the handle.
What metal is a fridge door made from?
The metal in a fridge door is made from sheet metal. The sheet metal is either clinched or welded together.
Which of the following would have the best thermal conductor properties a thick mug or a cup made of metal?
A cup made of metal
Are coins made of copper or metal?
All coins are made of some type of metal, but not all coins are made of copper.
Why is the shaft of screwdriver made from metal?
So it doesn't break.
How do you magnetize a screwdriver?
Rub it against a magnet repeatedly. * The screwdriver can only be magnetized if made from steel or another magnetic metal, and most of them are. * Once magnetized, the screwdriver will remain magnetized always.
Is a screw a conductor or a insulator?
Depends on the material, not the item. Metals are conductors, so a metal screwdriver blade Will be a conductor.
What is the handle and blades of a Phillips screwdriver made from?
The blade is metal and the handle is usually either wood or plastic.
What is the metal bit used for on the screwdriver?
To turn screws.
How do you make a screwdriver into a magnet?
You just stroke it in the same direction a few dozen times with just one pole of a powerful permanent magnet.The screwdriver must be made of of iron or steel: it won't work if the screwdriver is made of something like brass, aluminum or plastic because those materials are non-magnetic!Lots of people try to make a magnet using both poles of a horseshoe-shaped magnet but then it won't work as well because the second pole of the magnet will reverse the magnetising effect of the first pole.All you have to do is keep stroking the metal with just one pole of your magnet, pressing hard and always going in just one direction only and then pick up the magnet at the end of each stroke.Stroke the metal over and over like that with just one pole of your magnet until the metal of the screwdriver gets magnetized enough to pick up other pieces of metal, like a smaller screwdriver or some metal paperclips.But be sure to to try your magnetized screwdriver only on other things that are also made of a magnetizable material such as steel.
How do you remove metal middle of Mercury Gran Marquis rear view mirror to glue to windshield?
You will need a small screwdriver to pry the metal tab that is holding it in place. There is a little access notch on the bottom of the windshield mount, put the screwdriver thru there and either twist the screwdriver a little bit or push it up to get the metal tab out of the way- the metal part will slide out towards you.
Would magnets attract a scroodriver?
Yes, although the magnet may not be strong enough to move the screwdriver towards it. Screwdrivers are made of metal, meaning they are magnetic.
What is a screwdriver made of?
Typically screwdrivers are made of CHROMIUM MAGNESIUM IRON Some may use VANADIUM in place of the chrome.
Is it easy to assemble a metal bed?
Metal bed frames are generally lighter than ones made of wood. It is very easy to assemble a metal bed frame. You will not need to hire anyone. Generally, all you need is a screwdriver to help put in the screws.
Who made the sonic screwdriver?
The sonic screwdrivers from the second doctor to the tenth doctor were made by the doctor himself but the eleventh doctor's sonic screwdriver was made by the tardis because the tenth doctor's sonic screwdriver wouldnt work.
Where can you find a metal sonic screwdriver One that's not discontinued?
You can find one on ebay.com
