answersLogoWhite

0

Water is used when placing a specimen under a microscope to help create a flat surface for the specimen to rest on. This allows for better clarity and visibility of the specimen under the microscope. Additionally, water helps to prevent the specimen from drying out which could distort its appearance.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Chemistry

What is the glass sheet that a specimen is put on?

The glass sheet that a specimen is placed on is called a microscope slide. It is a thin flat piece of glass used to hold and view specimens under a microscope.


Why was iodine used to stain water specimen?

Iodine is used to stain water specimens for microscopic observation because it highlights structures like starch grains or cell walls. This makes it easier to visualize and study these structures under the microscope.


What is the difference between wet mount and dry mount?

- a wet mount is freshly prepared while a dry mount is pre-prepared and sealed. - the specimen is alive in a wet mount while in a dry mount the specimen is dead - air bubbles can be trapped in a wet mount but not in a dry mount - wet mounts are priceless while dry mounts costs


What should you do if a specimen spills on your clothes?

If a specimen spills on your clothes, you should immediately remove the contaminated clothing and wash the affected area with soap and water. Be sure to follow any specific handling instructions for the type of specimen involved and seek medical advice if needed.


Why use onions in a demonstration of osmosis?

Onions are commonly used in osmosis demonstrations because they have cell walls that allow water to pass through. By placing an onion slice in a hypertonic solution, like salt water, you can observe osmosis in action as water moves out of the onion cells, causing them to shrink and wrinkle. This helps to illustrate the concept of osmosis effectively.

Related Questions

How do you prepare specimen for stereo microscope?

To prepare a specimen for a stereo microscope, first place it on a clean glass slide. If needed, add a drop of water or mounting medium to help stabilize the specimen. Then cover the specimen with a coverslip, to protect it and ensure clearer imaging under the microscope. Finally, position the slide on the stage of the stereo microscope and adjust the lighting and focus for optimal viewing.


Why do specimens need dehydration to be viewed under a light microscope?

Dehydration removes water from the specimen, which reduces light refraction and improves image clarity. Water can scatter light and distort the image, affecting the resolution and quality of the observation under a light microscope. Dehydration also helps preserve the structure of the specimen for longer periods.


What are the steps involved in preparing a wet mount of a specimen?

To prepare a wet mount of a specimen, first, place a small drop of liquid (like water or a suitable medium) on a clean microscope slide. Next, using a pair of tweezers, carefully place the specimen in the drop. Then, gently lower a coverslip at an angle over the specimen to avoid air bubbles. Finally, observe the specimen under a microscope, adjusting the focus as needed.


What is the glass sheet that a specimen is put on?

The glass sheet that a specimen is placed on is called a microscope slide. It is a thin flat piece of glass used to hold and view specimens under a microscope.


Why you use a drop of water in preparing microscopic slide?

A drop of water is used to create a thin film of liquid on the slide, which helps to spread and suspend the specimen evenly for viewing under the microscope. It also prevents the specimen from drying out during observation.


How is a microscope with slides used?

A microscope slide is the commonest instrument in any Biology laboratory. It is a transparent rectangular glass apparatus and it fits underneath the lens piece of the microscope. It is used for mounting smears of body secretions, microscopic specimen of bacteria, viruses, fungi or parasites. One can stain the specimen they want to observe and focus the microscope on it. A cover slip is placed on top of the slide in order to keep the specimen in place. One can use a microscope slide in order to draw blood films as well.


What was the first thing looked at under a microscope?

The first thing looked at under a microscope was likely a biological specimen, such as a plant cell or animal tissue, in the 17th century. The microscope allowed scientists to observe these tiny structures in detail for the first time.


What should microscope slides be placed on?

On top of the Microscope slide, the specimen you wish to examine is place and then water and a coverslip is placed on top of that. Other things may be added depending on the speciment you wish to examine such as stainers like Iodine.


What are the applications of a water drop microscope in scientific research and how does it enhance the visualization of microscopic structures?

A water drop microscope is used in scientific research to enhance the visualization of microscopic structures. It can be applied in various fields such as biology, chemistry, and materials science. The microscope works by placing a water droplet on a surface, which acts as a lens to magnify the image of the specimen underneath. This technique allows for higher resolution and clearer images of tiny structures that may not be easily visible with traditional microscopes.


What things can you put under a microscope?

You can put a wide range of items under a microscope, including cells, bacteria, tissues, minerals, fibers, insects, plants, and small organisms. Almost anything that is small enough and transparent or thin enough to transmit light can be examined under a microscope.


Why was iodine used to stain water specimen?

Iodine is used to stain water specimens for microscopic observation because it highlights structures like starch grains or cell walls. This makes it easier to visualize and study these structures under the microscope.


What type of slide is made by placing the specimen in a drop of water on the slide and covering it with a glass slip?

A wet mount slide is made by placing the specimen in a drop of water on the slide and covering it with a glass slip. This technique is commonly used in microscopy to observe living organisms or specimens in their natural hydrated state.