0
Why should electronic equipment be removed when testing insulation resistance?
Wiki User
∙ 8y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How can copper be removed from an electric motor?
Take it apart and burn the insulation out, if you can, in a pile of brush. Or you could also take a torch to it and see if that gets the insulation out. If you use flame to melt the copper, beware of toxic fumes from burning rubber and plastic insulation.
When the resistor removed from a parallel connection of the circuit whether the resistance increase or decrease?
if we remove a resistor from the parallel connection the effective resistance value will be increased.
What happens for voltage gain when the load resistance is removed?
A: Nothing it just quit delivering power and sit at idle current
What is maximum output voltage of a transformer?
The secondary voltage (output voltage) of a transformer depends on the turns ratio of the transformer, and is limited by the practical insulation levels of the secondary winding, so can be very high indeed. Power transformers used in electricity transmission systems have secondary voltages in the range of hundreds of kilovolts.
What will happen to power delivered by solar cell do when resistance of he load is increased?
A: Nothing will happen if the load increases or even removed the voltage will go to the open voltage condition no harm.
Why the load must be removed when to conduct the insulation and resistance testing?
explain why all the load must be removed when to conduct the insulation and resistance testing
What has electrical fire removed?
Probably the insulation from the wire, if this is the train of thought that you are thinking.
What happens if the insulation is removed from the copper insulated magnet wire?
No it does not attract to magnets
When one load is removed from a parallel circuit the total resistance decreases?
No, the total resistance increases.
How maximum output power obtained?
when all the resistance removed from the circuit
How can copper be removed from an electric motor?
Take it apart and burn the insulation out, if you can, in a pile of brush. Or you could also take a torch to it and see if that gets the insulation out. If you use flame to melt the copper, beware of toxic fumes from burning rubber and plastic insulation.
How do you remove dried spray foam insulation eurethane from a painted metal door?
heat the other side of the door if you can & scrap off - it does work, we removed the insulation from aluminum sheeting that way
What does a solder do?
Removes solder from electronic components so that they can be removed from the circuit board
What is the Maximum Speed of the Jaguar XKR with the electronic limiter removed?
170 mph
How can mill scale be removed?
Mill scale can be removed by sandblasting utilising high air pressure sandblasting equipment.
What is Television a furniture fixture or office equipment?
A television if first and commonly considered a furniture fixture. If the television is used in an office atmosphere for work requirements, it can also be considered office equipment.
Is there really asbestos in insulation?
Currently it is illegal to add insulation to a home with more than a very small percentage of asbestos. Exposure to these small quantities of asbestos typically do not cause harm and are considered to be safe. Older homes may have asbestos insulation that needs to be removed as these older forms of insulation do present certain health risks.
