0
Foremost for safety to prevent injury to users but also to alow smooth connection when using tubing of rubber stoppers
Leonora Medhurst
Add your answer:
Earn +20 pts
What are the safety precautions and techniques when inserting a glass tubing in a rubber stopper?
never attempt to insert glass tubing that has a jagged end, all glass tubing should be fire polished before its inserted into a rubber stopper. Use water or glycerin as a lubricant at the end of the glass tubing before inserting it into the rubber stopper. ask teacher for proper lubricant. Protect hands and fingers by wearing leather gloves or placing a folded cloth between your hands and the tubing. hold it as close as possible to the part it is inserted to the rubber stopper. always point the tubing away from the palm of your hand that holds the stopper. use a twisting motion and push the tubing into the stopper. At the end of the experiment put on leather gloves or place the folded cloth between your hands and the tubing and remover the stoppers from the tubing to keep them from sticking to the glass. if it wont budge, use lubricant.
What is the name of the nut that is on the end of a brake line?
A tubing nut.
Should singular nouns that end in S be treated as plural?
No, singular nouns that end in S should still be treated as singular, not plural. They follow the same rules as other singular nouns.
Why do gas bubbles push water out of their way as they emerge from the end of an aquarium tube?
They have their own mass and volume, and they are coming out of the tubing with more force than the water surrounding the tubing.
What is the question at the end of the get the glass game?
Can I please get the glass
When did The Glass Eye end?
The Glass Eye ended in 2006.
When did Ravenhead glass end?
Ravenhead glass ended in 2001.
Where can you buy stirring rod?
Why not make your own ! All you need is a length of glass rod 6-8mm diameter. (any chemistry supply shop should have it) Simply heat the rod in the flame of a Bunsen burner until it softens, then press it against a flame-proof surface to form the end into a flat disk. Top the other end off with a short piece of rubber tubing to provide insulation in case it gets hot.
How can you tell if egr is bad?
If you are talking about the EGR valve, then take a piece of rubber tubing and plug it onto the EGR valve vacuum port and using your mouth pull a suction on the tube. The valve should actuate (pull in) and if you hold it with your tongue by stopping up the end of the tubing, it should also hold it's vacuum. If it loses it's vacuum or doesn't actuate it is bad.
Why do some air conditioning technicians file the end of copper tubing?
is it to restore full wall thickness
When did White Glass Company end?
White Glass Company ended in 1851.
When did Glass Slippers end?
Glass Slippers ended on 2002-07-28.
