Want this question answered?
If it is a Toyota, they do not know how to fix the squeaking brakes either. Even after replacing all the pads and machining the rotors and rear drums
The drive belt may be slipping or going bad.
If the work was done recently, then the pads have not yet worn into the rotors. This can typically take up to 200kms to wear in properly.
buy good pads, and install and have rotors machined
If you brakes are still squeaking after you change your brake pads in any car, you have a warped rotor. The squeaking is caused by the rotor vibrating when pressure is applied by the pads. The best way to permanently fix the problem is to replace your pads and your rotors at the same time. This can also cause accelerated wear on the new pads if you do not replace the rotors at the same time, or at least have them turned.
Cheap metallic brake pads always squeal. It is recommended to turn the rotors and lube the slide pins. Is it four wheel disc? Make sure the noise is coming from the axle that the brakes were replaced. Do this; replace pads with ceramic brake pads, resurface or replace rotors, and lube all metal moving parts.
the brake pads are probably worn - there are wear indicators in the pads made of solid metal that scrape on the brake rotors when they are spinning. When you squeeze the pads by applying the brakes, the main part of the pads make contact and muffle the sound. pads are cheap for most vehicles and easy to replace.
when needing brakes do you have to replace the rotors to on a s60r
how much does it cost to replace brakes rotors on honda crv
Your rotors are warped, replace them.
This will greatly depend on what kind of brakes you have and which parts you are trying to replace. Do you have disc or drum brakes? If you have disc brakes, do you want to replace the calipers, pads, or rotors? If you have drum brakes, do you want to replace the drum, or the shoes?
how to replace break pads on 2001 4runner