1990 gmc p/u 5.7 wont idle showing code 12
possibly a vacuum leak, low fuel pressure, or the idle air control has failed,
It could be the Idle Air Control (Idle speed control) valve. Its located on the left side of your TBI and has an electrical connection.
Check the throttle position sensor or the idle control motor
Check or replace the IAC (Idle air control) This is the problem 95% of the time especially in well maintained cars
It shouldn't need reseting? Probably controlled by the PCU (Computer)
no the camaro wheels are 5x4.75 and the truck is 5x5. so they wont fit
I just bought a 79 Chevy with the 5.7 350 in it..it was doing the same thing next time you put gas in it get some sort of additive like carb cleaner and put it in the gas then try and blow it out a little I drove mine about 100 miles when I bought it and it seems to be just fine now
stopped up fuel filter or poor fuel delivery
Bad transmission? Bent shift linkage?
Could be you need a new fuel idle motor. Or you need new spark plugs
Possibly the IAC ( Idle Air Control) vavle on the throttle body, or egr vavle stuck open..........would check or replace IAC first, usually not expensive.
Carb needs curb idle adjusted or rebuild.