Yes
The spark plug gap for a 1998 Chevy Lumina (with 3.1L or 3.8L engine) is .060".
You attach it on the engine
108mph for the 3100 engine
under the engine on the passenger side.
Is there a Repair Manuel for a 1998 Cherolet Lumina?
1994--2005 Buick Century1989--1996 Buick Regal1994--1998 Buick Skylark1990--1996 Chevrolet Beretta1990--1992 Chevrolet Camaro1990--1994 Chevrolet Cavalier1990--1990 Chevrolet Celebrity1990--1996 Chevrolet Corsica1990--1995 Chevrolet Lumina APV1994--1998 Oldsmobile Achieva1989--1997 Oldsmobile Cutlass Supreme1994--1996 Oldsmobile Cutlass Ciera1990--1995 Oldsmobile Silhouette1988--1991 Pontiac 60001990--1992 Pontiac Firebird1994--1998 Pontiac Grand Am1989--2003 Pontiac Grand Prix1991--1994 Pontiac Sunbird1990--1995 Pontiac Trans Sport
what is a 1998 olds moblie cutlass value
how do you replace a starter on a 1998 cutlass
i unhooked the battery...(both terminals)
At the engine end of the upper rad hose. Make sure when replacing it the spring goes toward the engine.
If it is a 3.1 any 1992 GM motor will work. If you are doing a motor swap from 3.1 to a 3.4 Dual Cam engine it can be done but you have to change more than the engine. The wiring harness and ECM (computer) have to be changed. Possible mounts also. If you are swapping to a newer engine (say a 1998) you might have to change the wiring and ECM.
1992 & 1998 Chevy Lumina 3.1L ECM Box LocationI finally found it on my 1992 Chevy Lumina 3.1 Liter. It is on the right side of the engine compartment behind the overflow reservoir container bolted to the shock tower. 1998 Chevy Lumina 3.1L ECM Box LocationI found it on my 1998 Chevy Lumina 3.1 Liter. Car: It is on the right side (Passenger side) of the engine compartment in front the overflow reservoir container and behind Radiator Cap.It is also under small fuse box.The ECM is in small black plastic box (about 1.5 Gallons).You remove the engine right bracket (3 -12 mm bolts) to get to this box then remove two clips on the black box cover... the ECM has two plugged in multi conductor cables. Using nut driver 9/32 th inch (7 mm) to take out these cables .ECU has part # ID 16236757