No, they will not work. Use only Murray breakers for safety.
No, a Cutler Hammer will not work in a GE panel or vice versa.
Type AE and AQ accept bolt-on breakers, type AL accepts plug-in breakers.
It depends on the specific style of the breaker. Bring your T&B breaker to a hardware store or Home Depot and check with the people in the electric department. Many are now interchangeable with ITE, GE and Square D. However, older T&B breakers are not interchangeable.
Possibly. Depends on which model Siemens breaker you have.
For Si it is 0.6or 0.7 and for Ge 0.3 or 0.2.Both values correct for both si and ge
Breakers are build to snap onto a buss bar in a breaker panel. If they look the same on the back end then they will likely work. If not do not try to force a fit. To add a little more to this: 1st of all it depends on what kind of Square D you are talking about. Square D Homline breakers will fit in a GE panel but GE breakers will not fit into a Homeline panel in my experience. Square D QO is not compatible with either.
In my experience, NOTHING is compatible with a Murray panel. Others claim there are certain Siemens and Federal Pacific breakers or Eaton type "CL", but you might have to obtain permission from the inspector to use anything other than Murray.
No, only Sq D breakers will fit into a Sq D panel. I believe Square D makes at least two styles of breakers. Home and industrial. I have a GE entrance/distribution box that has Square D (home), Murray, Bryant, Westinghouse, and GE breakers, all working together. I hope this helps.
In my experience, NOTHING is compatible with a Murray panel. Others claim there are certain Siemens and Federal Pacific breakers or Eaton type "CL", but you might have to obtain permission from the inspector to use anything other than Murray.
Legally, you must use the same brand breaker with the brand panel. They sell Murray breakers at your area electrical contractor shop, but used I am sure. However, square d homeline, siemens ite, GE, cutler hammer BR do fit but will void the UL listing and are dangerous to mix. Upgrade your panelboard. It is old.
There are many ways one can install ge circuit breakers. One can install ge circuit breakers by turning off the power supply, removing the panel cover, testing it for power, and installing it by alining the breaker with the unused panel space.
Siemen's is a brand of electrical breakers that will cross reference with GE thqb series breakers. Electrical breakers can be replaced by other brands if they are of the same type and fit in an electrical box.
No, a Cutler Hammer will not work in a GE panel or vice versa.
No, a Cutler Hammer will not work in a GE panel or vice versa.
Yes, as long as the lug connects to the panel thye same way.
Cooper breakers
Cutler - Hammer manufactures two types of residential circuit breaker for the US. Type CH and type BR. The type BR will fit into most GE panels. It is probably a bad idea to use any other circuit breaker except the type listed on the label of the circuit breaker panel. GE panels require you to use GE circuit breakers. Using any other brand may put you at risk for liability if the installation fails and causes harm or damage.