No. The 1989 Prelude's body style is different, and a little larger, than the 1984 body style.
Neither the front or rear bumper of a 1989 Chevrolet truck will fit on a 1989 Dodge truck. The bolt patterns are different and will not line up.
On the Prelude there are 2 O2 Sensors. They are on the exhaust manifold on the front of the engine. You will need to remove part of the plastic air intake in order to reach them.
I have a 1989 prelude si and im pretty sure there 15s
You will find the bleeder valve on the Slave Cylinder, which is mounted on the front of the transmission, by the radiator. You will find it in the front and center of the engine compartment.
The 1989 Honda Prelude had 4x100mm offset. The 1989 Nissan 240sx has a 4x114.3mm offset...so, it will not fit.
no considering the front is more boxy and wider in the front. the 1990 bumper is rounded to fit the 88-98 pickups , the suburban kept the box style until 1991. your best bet would be to find a 1973-1987 silverado,custom deluxe,cheyenne, or bonanza bumper or a suburban bumper from a 1973-1991 suburban
How do i take the fuel filter off my honda prelude si 1989
remove the square pop-out on the bumper and there is a screw on the outside of the light
Yes, but it will require a large amount of customization.
None of the dashboard lights work on my 1988 Prelude. Why?
The starter on the 1989 Honda Prelude is located on the left side of the engine. It is under the radiator hose that is at the rear of the radiator.
start underneath the van. screws go up from inside the front bumper to the grill