Yes. They both use the 4L60E transmission.
You can use any type of SAE certified transmission fluid in your 1997 Chevrolet Blazer. You can check the transmission fluid level with the transmission fluid dipstick.
can I put a 99 Chevy 4l60e transmission in my 86 k5 chevy blazer
Yes, they both had the same transmission options.
Will a 2000 blazer transmission fit a 1998 s 10 chevy 4x4 truck
The 1996 Chevrolet blazer transmission control system helps the transmission to maximize optimal fuel consumption. The control system keeps the transmission in the overdrive gear.
where can i buy a transmission dip stick for a 1995 chevy blazer
No it will not work, Is it not the same.
NO it will not. They are complete DIFFERENT designs. Will NOT interchange.
1998 Chevrolet Blazer did not have vent windows.
NO. The 95 is a electronic transmission and the 89 is NOT. Won't interchange.
Will a 1997 blazer what work on a 1999 blazer????? If your talking engine, transmission, or running gear than yes. It is all the same.
Where is the tcm in a 1994 chevy S10 Blazer
NO it will not. It's all together different. Not even close.
Will a Chevy blazer engine fit in a Chevy s10 pickup
The 2001 Chevrolet Blazer doesn't have a cabin filter.
There are several things that can cause shifting problems in your 1989 Chevrolet Blazer transmission. The most common cause of shifting problems is a lack of transmission fluid. Broken shifting forks can also cause transmission shifting problems.
The 1997 Chevrolet Blazer didn't come with a cabin filter.
No it will not even get close. Chevy REDESIGNED the engines and transmission in late 1999.
No it will not even bolt up. GM redesigned the transmission and its not even close to being the same as the 1989 trans.
NO.. It will not even begin to bolt up. In late 1999 chevy REDESIGNED all the engines and transmissions. Everything from late 1999 and up is DIFFERENT then late 1999 and down. Nothing will interchange.
I have an 1999 Chevrolet Blazer with 4 wheel drive, and it has about a 12-gallon tank.
The 1993 Chevy S 10 Blazer IAT sensor can be found on the top of the transmission. The IAT sensor will be near the front of the transmission.
The transmission dipstick on a 1998 Blazer should be located at the rear of the engine. It should not be near the oil dipstick.
You can buy a brand new 1 from the Chevy dealer for $1400.00
the 1996 and 1997 are the same and would not work in your 2000 straight from GM
It takes 30 gallons of gas to fill up a 1993 Chevrolet Blazer 1500. Features of this vehicle include power steering, and a manual transmission.
Yes, the doors from a 98 Chevy Blazer will fit a 2001 Chevy Blazer with a little moderation.
That would be the 4L60E
The automatics had the 4L60E.
for chevy s10 blazer v-6
If the blazer is wheezing, it could be transmission, but if it has 4-wheel drive, check to make sure that the gear is correctly shifted.
A 1983 Chevy Blazer transmission will hold 12 quarts of transmission fluid. The manufacturer recommends using a. SEA certified transmission fluid.
Chevrolet does not have reset switches.
The transmission fluid on a Chevy Blazer can be checked by idling the engine and allowing it to reach operating temperature. The dip stick can then be removed and checked based on the markings provided.
4l60e i got a 92 chevy blazer with the w engine it came with a 700 R
The Chevrolet Blazer does not have a fuel pump reset button.
A 1999 Chevrolet Blazer 2 dr fuel tank holds 19 US gallons.
Where can I download a free owners manual for chevy blazer S10 1994
The exploded view of a 1996 Chevrolet Blazer IFS can be found in the service manual of the vehicle. If you do not have theÊservice manual, it can be obtained from the nearest Chevrolet dealership.
I live in DE and they wanted 12 to 15 hundred to do my 1992 blazer.
An alternator from a 2000 Chevy blazer will fit a 2002 S10 blazer with a little fabrication.
The 1997 Chevrolet Blazer OBD 2 port is on lower edge of dash; right of parking brake
Fit 96 grill in 95 blazer
Through the dipstick tube
It should tell you on the transmission dipstick.
Any brand of antifreeze can be used in a 1998 Chevrolet Blazer. It is recommended that a person uses 50 50 antifreeze.
The curb weight of the 1985 Chevrolet Blazer is listed as 3760 pounds. The curb weight does not include any fluids or accessories.
The 1997 Chevrolet blazer actuator switch is located on the firewall in the engine compartment. The switch is on the passenger side of the engine compartment.
my Chevy blazer power seat on my 1996 Chevy blazer isn't working
NO. Not even close. Chevy redesigned ALL the TRANSMISSIONS and ENGINES in late 1999. Anything above 1999 WILL NOT FIT anything under 1999.