a 383 stroker is just a 400 crank in a 350 block...so yes
its s stroker crank that makes the 350 a 364
using a 350 Chevy big block with a slightly modified 400 crank. best be a 4 bolt main too!
the 383 is the same block as a 350 so yes it will fit.
NO, the 383 is called a stroker engine. It is a 350 with a 400 crankshaft that is machined, to make it work in a 350 block. There are other factors and modifications to be made when building a stroker. The only 383 that came from the factory is in Chrysler vehicles.
No. The Pontiac headers will not bolt up to the Chevy small block.
You buy the correct crankshaft, rods, and pistons and install them in your block.
A stroker is: An engine that has had the length of the pistons travel extended through a machining operation or: In the case of a small block Chev you can fit the crank shaft from a different displacement engine into a block and create a stroker. The 383 stroker is a common one. Use a 350 CID block and a 400cid crank and conecting rods to get the 383 cid with out the reliability and life shortcomings of the 400 block. It is also possible to de-stroke an engine to get percise displacement for racing or special operational requirements.
Bore your block .030" oversize and fit it with a 3.875" crankshaft and the appropriate rods and pistons.
Bolt a 400 crank into a 350 block. Doing so DOES require machining to both the block AND crankshaft. In addition to this, you will also need the rods, balancer, and flexplate from the 400. it wants more cam than you'd think.
It depends on which heads whomever built the stroker motor decided to use.
You have to look up the cast numbers on the block to see what year model,there are also cast numbers on the heads, the numbers on the block are behind where the distributor goes in, numbers on the cylinder heads are in the centers on the top in most cases
YES,You can interchange all 350 blocks except the LT series block. Do not know what year the change transpired. the 350 block is the same all from 1967 until they introduced the LT series model.I think the year model was around 1999 or 2000.Go to the libary and do some research and you can find some books that will give you all the information that you need