answersLogoWhite

0

same block, should fit

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Will the trans from a 2000 dodge Dakota with 360 fit a 97 ram 1500 with a 318?

NoNo


Will a 318 engine from a 76 dodge charger bolt to a 727 trans that is hooked to a 360 engine from a 78 dodge lil red express truck?

Yes


Can a dodge 360 converter work on a 318?

no a dodge 318 is internaly balanced and a dodge 360 is externaly balanced the converter, hermonic balancer and the flywheel are not enterchangeable


What are the Main Journal size on the Dodge 318 and 360?

318 and 340 are 2.500 360 are 2.800 Hope this helps


Hi will a 1990 dodge 1 ton 2wd 3speed with 318 or 360 trans fit a 1988 Ramcharger with 4x4 3 speed and 360 tbi trans thanks?

Yes. But! You will have to change the rear out put casing and output shaft.


Will a 97 Dodge 318 trans work in a 97 Dodge 360 trans?

The transmissions should be the same, but the torque converters are different.The transmissions should be the same, but the torque converters are different.


Is a 5.9 liter dodge magnum a 318 or a 360?

5.9L is 360 cubic inches 5.2L is 318 cubic inches


Will a 1990 Dodge 360 tbi unit and intake bolt to a 1987 318?

no heads and intake are different form a 360 to a 318


Can you swap a 318 to a 360 in a 2001 dodge ram?

Sure, it can be done.


How hard is it to put a 360 dodge out of a motorhome in to a 1967 dodge charger?

if your 67 had a 318 engine in it from the factory the 360 should bolt right in.


How do you Identify a Dodge engine if it's been swapped 318 or 360?

On the driver's side of the engine block you should see either 318 or 360 stamped.


Would a 1995 360 Dodge Ram motor fit in a 1995 Dodge Ram with a 318?

yes