Yes, but there's no guarantee that the ratios will match up... the Sonoma might have, say, 3.73 rears while the Jimmy has 3.42s (standard for the Blazer, Jimmy, and Bravada for that model year)... you'll have to look at the RPO codes in the glove box to determine this... 3.42 rears will have a GU6 RPO code.
The 1997 model was made one year after the 1996.
It is a 4L60E
5 x 120.7
1996
1997 and 1998 will fit on 1999. 1996 is a different model.
You can find a diagram for a 1997 GMC Sonoma in the owner's manual. You can also find it at various auto stores.
were is csp on gmc sonoma 2.2
Jimmy Peakes was most likely played by an extra and not given a character name as his name is unknown.
1342
GM S-Series Sonoma 2.2 I-4 2,000 GM S-Series Sonoma 4.3 V-6 6,000
The question is for a 1997 sonoma however the answer refers to a 1994 sonoma, and after trying this on my 1997 sonoma with no luck I found the answer under "Where is the flasher unit on a 1997 Chevy S10?" which is exactly where I found the flasher units for my 1997 sonoma and it was indeed the right flasher unit which was for the signal.AnswerI have a 94 Sonoma and to locate the turn signal flasher, inside, under dash, on left side is a plastic sound protector, mine had 3 screws holding it up, drop this down and straight in you will see a 1" round thing - this is the flasher, pull it out and replace with new one (there are two flat prongs that plug in). It appears this is a well guarded secret!
It is plugged directly into the orifice on the 94 model. I would expect it to be the same on all year models unless it has fallen out or something.