CA18DE(T) RWD & SR20DE(T) RWD clutches have different bolt patterns on the pressure plate. The CA18DE & KA24DE clutches are VERY similiar. You can use the KA24DE pressure plate on the CA18DE(T) flywheel, but you must remove one of the dowel pins. The fit is extremely tight, but it works.
no it is not
both are rear wheel drive so technically im sure it can be done. with extensive fabrication and electrical work just do an sr20 or ca18 swap its much easyer
27mm
4 cylinders 16 valves.
The vertebrae formula of an ox is C7, T13, L6, S5, Ca18-20.
cause when you let go of the clutch the wheels start turning. holding the clutch keeps it in neutral.
where does the clutch cable go from the pedal?? my clutch snapped earlier
The clutch of a go kart is much the same as the clutch on a car. The clutch disengages the engine from the gearbox enabling the gear to be changed. Without a clutch gear changing would be difficult and may damage the gearbox.
On the side of the engine close to the firewall. Near The Oil Pump
the extension clutch
You have a clutch problem The clutch is not releasing correctly and the the car will not go into gear This is probably a problem with the hydraulic clutch system.
The clutch is probably too used