Want this question answered?
yes! depending on the block. ie. a 350 or 305 will work with newer heads and intakes. as long as you have the correct gasket. the heads can not be reverse flow. they will not work without modification.
yes but you would need different engine mounts for the 302 short block
An electrician and a mason would be required to work as a team as a cinder-block wall is being constructed, the electrician would have to install the electrical boxes and short pieces of pipe as the mason is laying the block.
yes, the 350 block is identical to the 4.3 v6 only short 2 cylinders
I'm sorry, the 16 valve head will not work on the 8 valve short block. The piston crowns are cut differently so replacement of pistons would be necessary. It is my understanding though, that it COULD be done if the pistons were replaced. I have never attempted this, but by looking through the parts catalog, it seems that this is feasable.
yes ,I have change one out with a old 350 it had lot more power . I used the old heads to with vortec intake you have to slot the four bolt holes .but it will work.
The 350 engine is a small block, not a big block.
Block work is used to construct walls in Buildings of residential and commercial
the work performed is the weight of the block times the height, or rise, of the incline
The 5.7 heads will work if they have the smaller 184 intake valves . Or you will have to bore the block over to get the 194 ,200,or 202 intake valves to fit into the cylinder if not it will lock it up when the valve opens and hits the edge of the block
It does have SPF in it so it will work as a sun block as well.
Block won't work on Mespirit but you can still Burn it, Poison it, Paralyze it or put it to sleep.