Headlights Tail and Brake Lights
Geo Metro

Wiring diagram for brake lights on a 97 Geo Metro?


Top Answer
User Avatar
Wiki User
2008-05-23 19:26:06
2008-05-23 19:26:06

Most auto parts stores have wiring diagrams for a 97 Geo Metro. This includes wiring diagrams for the brake light, head lights, and much more.

User Avatar

Related Questions

which fuse triggers 1992 ford aerostar

When replacing or fixing brake lights it is important to have a diagram to have make sure everything is done correctly. A 3rd light wiring diagram for this car can be found in its maintenance or repair manual.

i need to know the wiring diagram for the brake switch .. it has six post divided into two plugs

need a wiring diagram for a 94 chev cab for the brake light switch

Brake lights could stay on in a 1999 Dodge Stratus because of a short in the wiring. If the headlamps are off and the brake lights are still on, check the wiring for the brake lights that is inside the trunk. Sometimes cargo in the trunk can interfere with the lights.

In situations like this it is best to have a diagram to help. A diagram rear defrost wiring system of a 1999 Sunfire can be found in its maintenance manual.

where can i find a diagram for a 1997 chevy s10 brake switch?

Public Library. Take a pad and pencil, you will be doing a lot of writing.

Is it the taillights or the brake lights? If taillights it may be a wiring problem, If brake lights check the switch on the brake pedal

It is important to have working brake lights on a vehicle. If the brake lights are not working a person should first check the fuse, bulbs and at last the wiring.

Check the brake light switch first. It is usually near the brake pedal under the dash. A bad turn signal switch can also cause this if the brake lights are also turn signal lights. If the brake lights are independent of the turn signals then disregard the switch problem. A good wiring diagram will help to diagnose the problem also. Check with dealership mechanics as they have access to diagrams.

check wiring, check bulbs, check fuse, check brake light switch,

Are you sure it's a short in the wiring and not a brake pressure switch that needs adjusting.

are you sure it is the brake lights and not the tail lights. if it is the brake lights you most likely have a short some where. go to a auto eletrican It is the brake lights which turn on. Short in the switch or the wiring?

AnswerThe bulbs for the brake lights are usually separate from the normal tail light bulbs. Check and replace the brake bulbs first, and if they are still not working examine the fuses, switch and wiring.

i have tail lights but do not have brake lights nor do i have turn signals. i have replaced brake switch and all bulbs

Not sure what the 'brake actuator' is, but...The "Related Questions" below address the brake on/off (BOO) switch mounted at the brake pedal.There's also one about finding wiring diagrams. The short answer to that is Autozone's free Repair Guide. They have a surprisingly large collection of wiring schematics for Windstars.

Often a dealer will let you get a copy of that page from the shop manual. Remember that they don't HAVE to give it to you, so be respectful when you ask for it.

put your foot on the brake.... if that doesn't work you have to fix the wiring for the brake/transmission interlock

If your parking lights are on and your left brake light doesn't work, the brake may have burnt out. You might also have a wiring problem.

And 'appen the brake lights come on when you switch on the side lights? Someone has swopped the wiring over... or forced the bulbs into the sockets the wrong way 'round!

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.