Would a mx-6 v6 transmission fit a 4 cylinder mx-6 engine?

Both cars should have same kind of engine: either 4 cylinder or 6 cylinder.

what year is the 302? (The bolting pattern varies) What transmission is it?

It would take a whole new engine. You can fit a Corvette engine in the engine bay. It's all in having the correct motor mounts and proper transmission fitment.

No, it's a completely different engine and transmission altogether.

It's very likely that the engine mounts will need changed, and the transmission as well. You'll want to change the computer as well as the old one is set to operate a 2.5L 4-cylinder.

If the S-10 was equiped with a 4.3 liter engine the transmission will probably fit the 350. The transmission used with the 2.8 liter engine WILL NOT fit the 350 engine.

No, a 91 metro transmission will not fit in a 98. A 91 will fit any metro between 1988 - 1996 though. After 1996 a lot of Metro's became 4 Cylinder which made them different from the previous generation metros. It may fit if the engine sizes are correct (1.0 litre 3 cylinder to the same but do not mix and match).

The subframe would be the same. The only thing with different engines would be engine mounts. But that has nothing to do with the subframe.

A better question is why would you want to put a ranger transmission on a mustang

Yes, you can make it fit with major modifications.

another 95 Geo- maybe a ford aspire, a old dodge colt or a lawnmower.

no it only fits 2.2 chevy

Unfortunately, a 1997 Toyota Supra engine and trans would not fit into a 1990 Mazda Miata. The Supra engine and transmission are unable to be mounted correctly within a Miata to make them fit.

"http://wiki.answers.com/Q/What_transmision_years_will_fit_99_mazda_626_4-cylinder"

No, it will not fit 94 model.

It would fit in the engine compartment, but nothing would line up or bolt up correctly.

will the 5 speed transmition out of a will a 1990 model ford pickup with a 6 cylinder , fit a 1990 modle 302?

The short answer is NO you cu_nt. 400 uses same belhousing pattern as 460, 429, 400 & 351M

A SOCH 240SX transmission will fit a DOCH engine. They have the same gearing and bolt pattern so they are compatible.

yes it will fit..both use the same transmission

yes it will fit any Chevrolet transmission will bolt up to any Chevrolet engine except for lt1 and ls motors

i need to know if the transmission will work from a 10 cylinder to a 5.9

The AX5 5speed works nicely.

A 94 Camry V6 engine will fit into a 93 Camry 4 cylinder. This is because both are rated to have around 190 to 194 horsepower.

if it fits in the vehicle and the transmission bolts up to the engine i do not see why it would not is a 3.4l or 3.8

will a 3.2L 2000 Isuzu Trooper engine fit a 3.2L Isuzu rodeo transmission

It would fit, but the engine will not run. The 2005 uses a different computer with different tone wheels inside the engine for the cam and crank sensors.

The Chevy 283 engine has the standard bellhousing configuration and is compatible with transmissions that bolt to first generation small blocks. The automatic TH350 transmission will fit the 283 engine.

The transmission is housed inside the engine cases. The 04 R1 has a redesigned engine that is not the same as the 2000 model, I'm sure it wont fit.

If the same engine, it would bolt in but the control systems may be different.

would a 1997 honda accord sunroof 4 cylinder fit a 6 cylinder?

If the 99 had a 350 vorteck in it, then it will not fit. In late 1999 GM stoped making the 350 engine and redesigned the engine block and Transmission.

Yes It would if its 2.3L engine size. Also, fits Oldsmobile Achieva of same year. Thanks

No the 4cyl and 6cyl transmissions are different.

Any transmission that is bolted to the same engine number. My subaru has an ea82 engine so any transmission that is bolted to an ea82 engine will fit. It has to be the same as far as automatic replacing automatic. Manual replacing manual.

In short, the answer is "No." The longer version is that while they will bolt up, the transmissions for the V6 are made with different ratios than the transmissions for the 4-cylinders. The computers for the engines are programmed for the "right" transmissions, and I seriously doubt the driveability would be acceptable.

A 6 cylinder will match a 6, and the 4 cylinder transmission but be matched to another 4 cylinder but as long as your stay with the same engine size they are interchangeable. The transfer cases are also interchangeable. The only thing that varies between a 4 and 6 cylinder transfer case is the output spline teeth count (21 for a 4, and 23 for a 6) which can be swapped between the two.

i think so, but i am not sure. i would also like to know for sure.

NO it will not bolt up to the engine.

a c6 transmission is the best match

no...they are different...it wont fit the block of a non turbo 4d56 engine...

No, they do not interchange.

i cant remember what the engine are in them but if the bell hosing looks like the pattern of the engine it will fit

transverse mounted four cylinder

If they are Automatics it will not shift properly. It would bolt up if they are the same engine.

hyd.350 turbo tranny and a 1979 buick regal has these

If by "motor", you mean "engine", then yes: as long as it is the same engine: SOHC* automatic transmission with SOHC automatic transmission; DOHC** automatic transmission with DOHC automatic transmission; SOHC manual transmission with SOHC manual transmission. Make sure all the fittings and connections line up. All Neons 1995 to 1999 are 2.0 liter 4-cylinder engines. *Single OverHead Camshaft **Dual OverHead Camshaft

If you have the 3.0L engine with a manual transmission it is a direct bolt up i dont know about the automatic but i am sure it is the same if you are switching from a four cylinder to the 3.4L then it requires a lot more work but it can be done a well

It will fit, but make sure that you swap the engine harness. You will have Transmission problems if you don't.

Direct bolt in NO. If you know what you are doing you can put it in anything, But the problem is that you would NEED the computer system and the intire transmission and engine wireing harness. You would also need the transmission for the 6.0L engine and the fuel pump and all the oxygen sensors plus the speed sensors.