0
Year of Production for Ithaca 37 SN 371386371 and was engraving on the receiver standard?
Wiki User
∙ 16y ago
Yes
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Browning a5 1951 shot gun with engraving with initials PV can you give info on this gun?
You have a standard Auto 5 shotgun with grade I engraving. The initials PV that you refer to are a proofing mark which is found on both the receiver and barrel. PV stands for "Poudre Vive" which means smokeless powder.
Value of Investarm 12 gauge 3 inch magnum over under 26 inch barrel serial number 415xxx 70-80 percent condition standard stainless steel receiver machined lines no engraving?
Approx £100 - £120
Can you run satellite dish on on your sony str-d715 receiver?
only if you have an RCA output from the dish to run into the receiver. The receiver does not have the standard coaxial input.
What was the Production Budget for Standard Operating Procedure?
The Production Budget for Standard Operating Procedure was $5,000,000.
Does anybody know where you can find info on a savage model 3 22 caliber it has a 24 barrel and a metal butt plate?
The savage model 3 or 1903 as it is refered to was made by savage arms company from 1903-1922.it was made in 5 different grades.The standard slide action,the grade EF which had B grade checkering on fancy english walnut stock,with a savage #22B front sight and #21B micrometer open rear sight.The expert grade had A grade engraving on the receiver,and B grade checkering on fancy walnut stock.The grade GH which had A grade checkering on a plain walnut stock,no engraving with the above listed sights.The gold medal model had animal ornamentation on receiver,less elaborate checkering on plain walnut stock,and standard sights. If you are asking about the savage No.3 then these were made from 1931-1945 by savage,with a total production of 121,000 guns made.
What is a Browning Twelveette?
The twelvette is a double automatic, lightweight version with aluminum receiver unlike the standard double automatic which has a steel receiver. The twelvette came in black with gold trim with gold engraving in 1955-1971. From 1956 to 1961 some receivers were gray, brown or green anodized, and had silver engraving. All twelvettes seem to have gold triggers also. I have a 1958 double automatic with black receiver and gold trim plus a gold trigger. On the side of the receiver the word twentyweight is engraved on it and the gun weighs 6 lbs. instead of 6.5 - 7 lbs which is stated for the twelvette's weight. I haven't been able to find any information on it's history or value. If anyone has any information on it I'd appreciate hearing from you. I'd also like to know where I could see an exploded view of the assembly??? stuart13@alltel.net
What does the a stand for in 755a savage?
The savage model 755A was different than the standard model 755 shotgun,because it had engraving,were the standard model did not.So the A stands for the engraved model.
Will a ar-15 pistol upper receiver fit on a standard ar15 lower receiver?
Yes, it will, but then it would be in an SBR (short-barreled rifle) configuration, and would be a violation of federal law if the lower receiver is unregistered.
What is a standard component in design technology?
Standard Components are pre-manufactured parts bought in by individuals or commercial manufacturers, usually as part of a batch production or mass production system.
What is the explanation for the meaning of standard hour?
A standard hour is an hour of production which should be used doing work.
How much does it cost for an extra receiver for dish network?
If you are referring to the monthly cost it would be dependent upon what type of receiver for example; high definition or standard definition, DVR capability or no DVR, single receiver or duo receiver. Currently, the charge for a additional receiver based upon capability, can cost any where from $7/mnth up to $17/mnth.
How do you connect a standard definition TV to a high definition satellite receiver?
You can connect your standard definition TV to your satellite receiver in a couple of ways. First, if your TV has composite video/audio inputs (yellow, red, and white RCA jacks), you can connect to these inputs using the composite video outputs of the satellite receiver. Another alternative is to use the standard coaxial cable output from your satellite receiver to connect to the 75ohm antenna input on your TV. *Note: Neither of these connections will display high definition programming on your standard definition TV. The TV is only capable of standard definition, so you will see a clear picture, but it won't be true high definition, regardless of the input signal's definition.
