A person should replace the power roof fuse to help fix it, if it is stuck open. In the meantime,a Êperson can try to pull it shut with their hand or their tools.Ê
Possibly kickdown button located under the 'gas' pedal is stuck in the down position.
it's manual no power
Defective passenger power window switch. It is stuck in the down position. Raise the window and immediately disconnect the switch until you can replace it.Defective passenger power window switch. It is stuck in the down position. Raise the window and immediately disconnect the switch until you can replace it.
Short to power in the horn circuit, relay stuck in the closed position, stuck horn switch.
It means your break pedal switch is stuck is open position. remove the under dash plastic panel and release it with your hand and your car is good to go.
Your power lift chair may be stuck in the up position due to a malfunction in the motor or the wiring. To fix it, you can try resetting the chair by unplugging it for a few minutes and then plugging it back in. If that doesn't work, you may need to contact the manufacturer for further assistance or have a professional repair person look at it.
The air conditioner needs regassing
To lower a stuck power window on a 1992 Mercedes SL 500, first check the fuse related to the window operation and replace it if necessary. If the fuse is intact, try gently tapping the door panel while pressing the window switch to see if it will release. If that doesn't work, you may need to access the window motor by removing the door panel and testing the motor directly with a multimeter or applying power to it to see if it functions. If the motor is faulty, it will need to be replaced.
My brinks locked in the open position. What do I need to do to get it fixed
depress foot brake as hard as you can, then pull it out of park. happened to me
If the windshield wipers on your Mercedes-Benz remain in the up position and won't return to their resting place, first check the wiper switch to ensure it's not stuck in the "on" position. If that's not the issue, try turning off the engine and restarting it to reset the electrical system. If the problem persists, there may be a malfunction in the wiper motor or the relay, and it's advisable to consult a professional mechanic for diagnosis and repair.
with a 10 lb. sledge hammer