The overdrive in the Windstar could have an internal problem, or the control from the overdrive button may not work. Run a check of computer codes to see if a problem shows up.
no....
Pressing it will disable the overdrive.
i dont know ask your mummy.
the wiper dont work
why don't any of my running lights work
You probably need to recharge the freon.
on my windstar speedo only worked when it wanted to I replaced the speedo head 2 years later still works great
Call an auto wrecker/used parts dealer. They have computer programs that will quickly and easily tell what years are interchangable. And if there are any stipulations. Its the easiest way by far.
The Ford Ranger and Ford Windstar were produced on two totally different chassis. This makes putting a hitch from a Ranger onto a Windstar a structuraly problem. If you know how to weld pieces onto or cut pieces off of the hitch, there is always a way to make the hitch work. If, however, you want to just take the hitch off of the Ranger and bolt it up the Windstar, that would never work.
you have to check to see if it is hooked up, my 01 was unplugged behind the buttons.
a call to your local salvage (junk) yard should answer this easily.
Any OBD2 scanner will work.