www.lmctruck.com
can you use a transmission from a 1993 ford ranger in a 2000 ford ranger?
how to i change a clutch in a 1993 ford ranger
The engines in a 1993 Ford Ranger are fuel injected , so there is no carburetor
The 1993 Ford Probe rear brake light lens cannot be removed. The tail light are a complete seal light. The light bulb's can be removed from the rear of the light assembly.
Open the tailgate and remove the retaining bolts from the side of the lamp housing (tail light assembly). Take the assembly out of the fender. Rotate the bulb socket to align the lugs and take the socket out of the housing. To remove the bulb from the socket, carefully pry the retaining clip and pull the bulb out. Installation is the reverse. - Haynes Repair Manual #36071, 1993-2005 Ford Ranger Pick-ups.
Open tailgate. Remove the light assembly screws. Rotate the bulb socket to align the lugs and take the socket out of the housing. Carefully pry out the ratainig clip and pull the bulb out of the socket. Installation is the reverse. - Haynes Manual #36071, 1993 - 2005 Ford Ranger Pickups, all models.
Yes, a 2003 Ford Ranger tailgate will fit a 1993 Ford Ranger. As of July 2013, the average price of a new tailgate for a Ford Ranger is around $160, plus tax and shipping.
The blower resistor assembly is located on the heater case to the right of the blower motor. - Haynes Repair Manual #36071, 1993-2005 Ford Ranger Pick-ups
The blower resistor assembly is located on the heater case to the right of the bloser motor. - Haynes Repair Manual #36071, 1993-2005 Ford Ranger Pick-ups
I have a '93 Ford Explorer and it hold 19 gallons From the Chilton Ford Ranger guide: "1993 Ranger with standard wheelbase: 16.3 1993 Ranger with long wheelbase: 19.6"
The switch is located just above the brake pedal.
yes