How do you unlock a car door without the key?

Answer 1

Most wrecker services can do it, but that can be expensive. Some cars can be opened with a Slim Jim. A flat, thin piece of metal with a hook on the end. This take some practice and some cars have a plate inside the door to prevent this. There is the tried and true use of a coat hanger. Pull out on the top edge of the door frame and slip the coat hanger in and trip the lock. This take patience. Sometimes, a policeman can open it with a Slim Jim. Learn from experience and keep a spare key in your wallet or somewhere on the vehicle because this will probably happen again in your life time.

Answer 2

You could hook up a button switch and run it into the relay for the wireless trunk release. This is found behind the kickplate on the passenger's side floorboard. Find the Green Wire with Black Stripe into the relay switch. If you place a wire into this outlet and then ground the same wire against the body metal you will hear the solenoid for the trunk release.

So, just hook up a Momentary Push button somewhere where you would like to put it in the car (one side of the connector to the relay and the other side of the connector to the metal frame [i.e. ground]).

This will create an inside release switch without having to remove the key from ignition to open the trunk.

Answer 3

you can either take a hammer to it and wack it until it opens. remove door lock cylinder from one of the doors and take it to the lock smith and get a key cut. or my personal way of doing it, you can remove the back seat crawl into the trunk and use a flat head screwdriver to open lock.

Answer 4

Take the back seat back out and get a ratchet, looong extensions and 13 mm socket and take off the latch mechanism.

Answer 5

Ask a locksmith to unlock it. It only takes a second or two for a good locksmith to unlock this with a rake.

or you can always youse a crowbar

Answer 6

find someone who is really good at picking locks