I don't know if it's very different to the process on a 2001, should be similar.
You have to start in under the hood.
For mine, first had to carefully pop out the plastic dam that sits horizontally between the grill and the metal frame. Once that's moved, there were two plastic tab things that you pull and the light assembly will be free....careful not to let it fall off or you'll be paying $250 to replace it.
Then just pull the bulb wire out the back, change and reassemble.
The plastic dam thingy is held in with those plastic grommet things and can break so be careful. 1 of mine broke but not a big deal.
Open your trunk the two inner bulbs are for your license plate twist and should pop right out
The license plate bulb on a 2005 Buick LeSabre is replaced by unscrewing the bulb cover and twisting the bulb. A new bulb can then be installed before putting the cover back in place.
I have a 2005 1500 and you have to pull the whole assembly out. There is a bolt that is really hard to get to on the bottom!
suppose to be 2 bolts on each light to remove them
how to change 2005 equinox license plate light i removed the screws but it didn't release
bulbs are covered under your bumper to bumper warranty.
you have to remove the cover of the dashboard to replace the light bulbs
To change headlight bulbs in a 2005 Ford Escape, first make sure the light switch is in off position and replace the passenger light bulb. Next, get to the driver's side bulb, remove the battery by holding it down, to be able to change the headlight bulb.
There are two screws in the tailgait jamb, just remove them and the lense comes right out exposing the bulbs.
I have a 2005 Echo hatchback and need to change my headlight bulbs...The issue is on the right side, it is fairly cramped with the fuse box and battery. I am looking for a quick answer or two that may get me on my way
Full Plate - 2005 was released on: USA: 23 July 2005
Heinz Plate died in 2005.