What is the dish network remote code for haier tv?

Answer 1

Haier does not typically offer remote codes but I was able to find some that do work to some degree for my LED flat screen model LEC32B1380. 681, 684 provides power on/off. 738 provides power plus volume. Use the following process to find codes for your TV if the above do not work for you.

Power scan instructions:

Step 1:

Press and hold the TV mode button until all mode button back lights illuminate, then release.

Step 2:

Press and release the Power button.

Step 3:

Press the Up button once a second while pointing the remote at the desired equipment. If the code for the equipment comes up, the equipment will poweroff.

Step 4:

Press the pound (#) button. If the code entered is valid for the remote, the mode light flashes three times.

After doing the power scan please remember to put the remote back into SAT mode.

Cheers!

Answer 2

I found the answers below did not work with our Haier TV (model 15HL25S). I proceeded to go one by one through our remote's (Sanyo RMT-U340) TV codes and found that the 'AOC' brand code works for our Haier TV.

---

I looked on the Net for about two hours, including the answer below. While the answer below has great information, I didn't figure this out until I saw a TV for sale that said Advent Haier. I went back and tried the Advent codes from the remote instruction booklet, and the first Advent code worked.

Here are some codes that might work also for you, 01768,11034,11265, (this one worked for me on directtv remote) and 10178, also if you go to the DirectTV web site it will look up codes for your TV?

I encountered the same problem with my old 13" Haier tv i bought back in 2001. I bought a Radio Shack Family Favorite 5-in-1 remote for $14.99 since it was the only one that listed Haier. That code was 1034. Try that.

---

That didn't work for me unfortunately, so I referred to a combination of the troubleshooting of the 2 previous models (4-in1 and 3-in-1).

1. Press "TV" button

2. Hold "P" (program button) till the "TV" button flashes once then twice

3. Enter 9 9 1, and the "TV" should flash twice

4. Aim the remote at the TV and hold the Power button down for at least 3 seconds. (Remote automatically goes to first code but it probably wont work so go on to step 5)

5. Press CH+ repeatedly till the TV shuts off and stop immediately!

6. Hold "P" for 2 seconds

7. Hold "Select" for 2 seconds

8. Hold "P" for 2 seconds

9. Hold Power for 2 seconds and TV should turn back on.

If not. Repeat steps 1 thru 9. I know it sounds tedious but its the best bet. It took me three tries because my finger slipped and hit other buttons or I didn't stop when it shut off. I spent 3 hours looking for codes online and nothing worked.

Replacement on the Haier website is $19.99 plus a load in shipping. This beats that!

Should the 991 code search fail, those instructions are nearly identical to one for my remote (manufactured by Universal Electronics), and my user's guide includes Haier TVs on its manufacturers' codes list. Try 10768, 11034 and 11748.

Okay, new info. Just spoke with Haier customer service person who says that no Haier flat screen TVs or, for that matter, DVD players, are set up to be able to work with a universal remote; only their older tube TVs do. The Haier remote must be used. So we all can stop trying to find the codes. It wold have been nice is the user guides had revealed this unfortunate absence of functionality. Perhaps customer service didn't know.

I just got the code for my remote and it works great (code 11265).

Answer 3

i want the tv haier codes for universal manette