0
What else can I help you with?
What is the bottom of the curve of liquid in a graduated cylinder?
Since the surface of water rises up to the sides of the cylinder, the low point is in the center of the surface. (Volume is assumed unless boiling or melting points are stated)
When reading a scale of water do you read of the tip of the water or the bottom curve?
In a graduated cylinder, the water or liquid will tend to pull its surface up the side just a bit. This curved shape is call the meniscus. You should read the level at the lowest point of the meniscus, in the center. Turn the cylinder so that the markings are toward you, so you can see the low point of the meniscus behind the markings to get your measurement. There are a few liquids which want to pull away from the edges, which will thus have an inverted meniscus. For these, you would read the high point.
What is the measure at the bottom of curved surface of water?
The meniscus is the name for the way that water forms a concave curve at it's surface. This is because of the cohesive and capillary properties of water.
What molecular attraction causes surface of the water to curve inside a glass?
The force of adhesion between water and glass molecules is greater than the force of cohesion between two water molecules.This causes the surface of the water to be curved. This curved surface is called a meniscus.
Is a meniscus the scale on a Triple beam balance?
If it is, I'll be damned.a meniscus, as far as I know, is the maximum curve of a liquid in a measuring cylinder. you read the volume from there.
The curve on the surface of water is a graduated cylinder is called?
The meniscus.
What is the curve of the top surface where the water is in a graduated cylinder called?
that would be the meniscus
What is the name of the curve on the graduated cylinder?
The curve on a graduated cylinder is called a meniscus. It occurs due to surface tension between the liquid and the container, causing the liquid to curve at the edges. When measuring volume in a graduated cylinder, the bottom of the meniscus should be used for accurate readings.
The curve of the top surface of water in a graduated cylinder is called what?
"Still That Girl" by: Britt Nicole
The curve in the top surface of water in a graduated cylinder is called?
"Still That Girl" by: Britt Nicole
What is the liquid curve in a graduated cylinder called?
The liquid curve is called a meniscus.
What is the curve at the top of a liquid graduated cylinder called?
menniscus
What is the curve of the top of water in a graduated cylinder called?
"Still That Girl" by: Britt Nicole
What is the curve of the top surface of water in a graduated cylindar called?
It's called a meniscus
What is the the bottom of a curved line in a graduated cylinder?
The "bottom of a curved line" made by the liquid in a graduated cylinder could be called the "measuring line" or "reference line" in the application of that piece of labratory equipment. The curved surface of the liquid itself is called the meniscus, and we look to the bottom of the meniscus to make our reading as to the volume of the liquid in the graduated cylinder. The liquid in the cylinder "grabs" the sides of the cylinder and "pulls itself up" just a bit, and that creates the curve in the surface of the liquid. And that curve, the meniscus (which is from the Greek word for crescent), leaves us with a problem: where do we "read" the volume marked off by the graduations along the side of the cylinder? And the answer is, "At the bottom of the meniscus."
Are correct procedures for reading the volume of water in the graduated cylinder?
Water in a glass graduated cylinder adheres to the sides of the cylinder, forming a meniscus which is an upward curve. When reading volume in a cylinder, look at the meniscus at eye level. Read the volume at the bottom of the curve.
When using a graduated cylinder you measure the level of the water from the bottom point of the curve what is it called?
a meniscus
