0
It all depends on the type and sizes of the steel used. It also depends on the load that the concrete has to take at certain points. 7865kg is the weight of a cubic meter of steel.
Typical examples;
A pile cap could contain 400kg/m3
A heavy duty industrial slab or structure could contain 200kg-400kg/m3
A footpath could contain 40kg/m3
(all depends on the design, but numbers above should give you a rough answer)
What else can I help you with?
What does steel stirrup do in reinforced concrete beam and column?
It proves shear reinforcement in the beam.
Nominal percentage of steel reinforcement in concrete?
2%....according to Bureau of Indian Standards, Concrete design code book - IS-456
What is the purpose of compression reinforcement in beams?
Steel is stronger than concrete. By adding some reinforcement in the compression zone of a beam, it's bending strength can be increased without increasing the size of the beam. The steel increases the compression strength, while the concrete prevents the slender steel bars from buckling.
What is the meaning of steel re bar?
Rebar is an informal term for steel "reinforcing bar". These are steel bars that are placed within the structure before the wet concrete is placed. Steel reinforcement is necessary for almost all structural concrete because concrete has virtually no tensile or shear strength. The rebar provides almost all of the resistance to tension and shear within the structure.
What is RCC Pardi?
In construction RCC means reinforced cement concrete, however RCC Pardi is a versatile and hardy roofing material. Yes, it is composed of reinforced cement concrete. The reinforcement is typically steel.
How many tons of steel reinforcement are needed for a 100 cubic meter concrete slab?
100 TONS
How do you calculate kg of steel reinforcement in one cubic meter concrete?
it would depend entirely on the rebar design.....
How many kg of steel reinforcement in one cubic meter concrete for foundation?
100 kgs of tor steel
How many kg of steel reinforcement in one cubic meter concrete for retaining wall?
The amount of steel reinforcement in a concrete retaining wall is typically measured in terms of kilograms per cubic meter (kg/m³). The exact quantity of steel reinforcement required can vary depending on factors such as the design specifications, load requirements, and the dimensions of the retaining wall. In general, a common range for steel reinforcement in concrete retaining walls is between 60 to 150 kg/m³, but it is crucial to consult with a structural engineer or refer to specific design guidelines for an accurate calculation.
What is the volume or percentage of reinforcement steel occupied in one cubic meter of concrete?
Completely variable from nothing to 2 or 3% depending on what is being fabricated.
How many kg of steel reinforcement in one cubic meter?
250 kg
How many kg of steel reinforcement in 1 cubic meter?
7600 kg
How much percent steel for 1 cubic meter concrete?
1%
How many kgs of steel per cubic meter of concrete for major bridges?
10
What is the ratio of steel in concrete?
As per the civil engineering thumb rule, weight of steel for one cubic meter of concrete is 100kgs to 130 kgs for normal structures
What is unit weight in kg of rebars per 60MPa of one cubic meter of reinforced concrete?
The unit weight of rebars is typically around 7.85 kg/m³. In a reinforced concrete mix with a compressive strength of 60 MPa, the amount of reinforcement steel used is usually between 1-2% of the total volume of concrete. Therefore, the weight of rebars per cubic meter of reinforced concrete at 60 MPa would be approximately 78.5 kg/m³ to 157 kg/m³.
What is the technical name of the steel using in concrete?
Reinforcement
