Since this is a VCR question, it all has to do with the speed the tape runs through the VCR. The faster the tape, the higher the quality of the video you're recording because the recorder is able to put more picture information on the tape.
SP, or standard speed will allow a VHS tape to record for a period of 2 hours and will provide the highest quality picture. EP (which has for the most part, been dropped by the manufacturers) would record for four hours and LP, which is the slowest speed, will record for six hours, but with degraded video. This is of course, based on the standard VHS cassette. They do make an 8 hour tape, which will run at approximately 2 hrs and 40 minutes at SP, 5 hours and 40 minutes at EP, and eight hours at lp. Most stores don't carry the T-160 tapes and they are a bit more expensive.
Most VCR's manufactured today will still play an EP recorded tape, but cannot record at that speed.
The main difference that i know is the sp had the dohc motor
what is difference between real player sp and real player gold
sp3 is better
Sp has lighter screens. ( because sp means special screen in my opinion)
The vibe and SP-1 have the same internal work, the difference is the body. The SP-1 has a tactical look and a single trigger. The Vibe has a sleek look with a double trigger.
SP means Standard Play, the speed the tape was designed for. LP means Long Play and EP means Extended Play.
There isn't any difference between the gameboy advance and the gameboy advance SP, other than design and the backlight added to the SP. So, there's no difference in the games, either, and you can play any gameboy advance game on an SP or on the original advance.
In record mode, "sp" typically refers to standard play, while "spp" indicates a special play mode. "lp" stands for long play, which allows for extended recording time at the expense of quality. "ep" or extended play offers a compromise between quality and recording duration. "slp" is super long play, maximizing recording time but significantly lowering quality, whereas "ho" generally refers to high-output modes that prioritize quality over duration.
The major difference between SP iii and Dexron iii is the lubrication modifier. SP iii contains more lubrication qualities than Dexron iii. You can interchange the two but run a slight chance of premature wear using Dexron iii where SP iii is indicated.
it should. i looked it up on the Nintendo site and they say that the only difference between an SP and a GBA is just outter style/look. Hence why the GBA SP is called SP. SP stands for Special. it said the insides are still the same so as i said before, it should work.
The ES index represents the E-mini SP 500 futures contract, which is a smaller version of the standard SP 500 futures contract. The SPX index, on the other hand, tracks the performance of the full-size SP 500 index.
The bond angles between sp and sp hybrids are 180 degrees. This is because sp hybridization involves the combination of one s orbital and one p orbital, resulting in a linear geometry with bond angles of 180 degrees.