Generally input would go first, since. a computer won't do anything until it receives instructions.
input goes first the processed result is displayed as output
Both. There's a touch panel that is used to feed information in to the device (input) and a screen underneath the touch panel to display stuff (output). This makes it to be both input and output.
In an op-amp, an input on the inverting terminal drives the output in the opposite direction, while an input on the non inverting terminal drives the output in the same direction. In a normal closed loop negative feedback configuration, there is feedback from output to inverting input, so that the output becomes a known function of input. So long as you stay within limits, the output will go to whatever value is required to make the inputs be the same.
There is no such thing as an inverting or a non-inverting op amp.All op amps have both an inverting input and a non-inverting input. Their operation is such that the output will go to whatever value is required to make both inputs be the same. This implies feedback from output to inverting input.
Output, the sound is coming from the computer. Headphones are output; they produce something after receiving signal from another device, such as a computer or electronic player. When you use headphones they go in the output port of your computer.
All you have to do is look at your input number and then see how many fit goes up by like say it goes up by 1,2,3,4,5... Then you think of an output number that can go up by 1,2,3,4,5.... Than you will find your answer of the input number
The speakers are an output device because they are delivering data from the computer to the user. Speakers, monitors, and printers are examples of output devices. Keyboards, mice, and tablets are input devices. Devices that are i/o devices (input and output) include floppy drives, hard drives, cards, and USB drives.
It can be both, depending on where it is in the process. In most cases, it will be an output into another device, so it would be plugged into the input of the other item. In a typical cable TV set up, the cable would go into the input of the DVD and the output of the DVD would go to the input of the television.
Input energy is when. . .say. . .you eat fruits or vegetables, and you get energy from them. You BRING IN energy or get energy. Output energy in when. . .say. . .you go run a mile or 2, and you use energy. You are PUTTING OUT energy.
It generates an oscillatory output signal without having any input source
so that they go into a system to make the body work
You will need 2 amp cords for the process. Plug the cord going into your guitar into the input to the pod then take the second cord that's plugged into your amp into the pod output space. That should have you ready to go.
if u multiply optical x input and input x optical then u will receive the input optical for ur result and this will be ur optical input. my answer is correct and it will work no matter what. if u have any problems go ask someone who cares. xx