I want to this model remote
we u goin 2 gaius
To program codes in a GPT universal remote control, RM-788, first you need to know the make and model of your television set. Then you find that code number on the pamphlet that came with the remote and enter it on the remote.
To use a classic IRC OD remote for your TV, first ensure the remote has fresh batteries and is compatible with your TV model. Power on the TV and press the "TV" button on the remote to set it to TV mode. Then, press and hold the "Set" button until the red indicator lights up, followed by pressing the "Power" button until the TV turns off. Release the "Set" button, and your remote should now be programmed to control your TV.
To set up the LG TV remote model MKJ39927802, first, insert fresh batteries into the remote, ensuring they are correctly oriented. Next, power on your LG TV using the power button on the TV itself or the remote. If the remote does not automatically sync, press the "Home" button and follow the on-screen instructions to complete the setup. Ensure you are within range of the TV and that there are no obstructions blocking the signal.
Your best bet is to go to the Quasar web site and look up the codes for your model and plug them into the remote. If that doesn't work, chances are the remote is not compatible with your set. But don't go running out to buy a new remote. Most of them have an auto-programming mode and can usually find most any piece of equipment it is aimed at. wjs1632
Dish Network-722 but i tried it but it didnt work
remote assistance
Almost certainly it does. There are many universal remotes so you will need to follow the set up instructions with the remote to configure the remote to operate with your model of television. Some instructions are better than others - read them carefully and follow each step for a successful configuration.
An alarm remote is a remote control for an alarm system. A remote alarm is an alarm that rings somewhere far away from whatever set off the alarm.
Yes, you can use your Samsung TV remote or Fios remote to control the volume on the Samsung HW-H450ZA soundbar, provided that the soundbar is properly connected to the TV. For the Samsung TV remote, ensure that the soundbar is set as the audio output in the TV settings. For the Fios remote, you may need to program it to control the soundbar by following the setup instructions specific to your model.
http://downloads.devicemanuals.com/dl/rca/RCR311B.pdf
No. It's Remote Assistance