Need codes remote control rca universal guide plus gemstar?

Answer 1

I have a 55 inch lg flat screen tv i need codes for a universal guide plus remote

Answer 2

Instructions

1. Automatic Code Search
   • 1

     Turn on the first device you want to program to the Gemstar remote control.

   • 2

     Hold down the button you want to program, for example "DVD," while holding the "ON/OFF" button until the red indicator light comes on. The remote control is now in programming mode.

   • 3

     Point the Gemstar remote control at the device and press the "Play" button. The indicator light will blink for approximately five seconds as it searches the first group of codes.

   • 4

     Press the "Play" button after the indicator light stops blinking to check the first group of codes. Continue doing this until the device powers down.

   • 5

     Push the "Reverse" button and wait approximately 2 seconds. Continue doing this until the device turns on again.

   • 6

     Save the code setting by pressing and holding the "Stop" button until the indicator light stops blinking.

   • 7

     Repeat Steps 1 to 6 for each device you want to program to the Gemstar remote control.

   Direct Code Input
   • 8

     Review the last page of the RCA Gemstar remote control user manual. This page has a list of device manufacturers. Look up your device's manufacturer to find the remote codes for your device.

   • 9

     Turn on the device you want to program to the remote control.

   • 10

     Press and hold the button you want to program, such as "SAT/CABLE," and use the keypad on the remote control to enter the first code from the list.

   • 11

     Release the button you want to program and press the "ON/OFF" button to see if the programmed code worked. The device should shut off if the code was successful.

   • 12

     Repeat Steps 3 and 4 with the next code on the list until you find a code that operates the device.

   • 13

     Program the rest of the devices you want controlled by the Gemstar universal remote control by repeating Steps 1 to 5.

Answer 3

Codes for LG