The weight of one gallon of chlorine bleach is 8.375 pounds!
The amount of chlorine needed for a pool depends on its size, level of usage, and current chlorine levels. A general guideline is to add 2-4 ppm of chlorine to a pool, which can typically be achieved by adding 1/2 gallon to 1 gallon of liquid chlorine per 10,000 gallons of water. It's important to test the water regularly and adjust the chlorine levels accordingly.
Chlorine gas is compressed and cooled to very low temperatures to turn it into liquid chlorine. This process involves reducing the temperature below its critical point to change its physical state from gas to liquid. Liquid chlorine is typically stored and transported in pressurized containers to maintain its liquid state.
There could be several reasons why a pool may have no chlorine. This could be due to insufficient chlorine added to the pool, the chlorine being depleted too quickly, or the pool's filtration system not functioning properly. It's important to regularly test and maintain the chlorine levels in a pool to ensure proper sanitation.
The most common liquid chlorinator (sodium hypo-chlorate) is a pale green. Elemental chlorine is actually a gas with a pale yellow/green hue.
The density of liquid chlorine decreases as the temperature increases. At 0°C, the density of liquid chlorine is around 1.56 g/cm^3, whereas at 100°C, the density decreases to approximately 1.41 g/cm^3. This decrease in density with temperature is due to the expansion of the chlorine molecules as they gain heat energy.
For a 4500 gallon pool, you will need about 1 gallon of liquid chlorine to raise the chlorine level by 1 ppm. The amount of liquid chlorine required will depend on the current chlorine level in the pool and your desired level.
Approximately 8 pounds of shortening equal 1 gallon of liquid.
One gallon of liquid beeswax weighs approximately 8.5 pounds.
Pool shock is calcium hypochlorite. Liquid bleach is sodium hypochlorite. Liquid pool shock is sodium hypochlorite. Yes, they are all basically the exact same things, the only difference is which metal they are bonded with for delivery and stability. Calcium hypochlorite is the granulated form of pool chlorine. It is useful if you have an in ground plaster/concrete/gunite/tile pool as it supplies calcium to the water to help maintain hardness. Sodium hypochlorite is liquid form. This is useful to use if you have a vinyl lined pool since you don't need to maintain elevated calcium hardness in these types of pools. Household bleach (non scented) is 6% sodium hypochlorite by solution. Liquid pool chlorine is 10%-12% sodium hypochlorite by solution. Granulated chlorine is 65% calcium hypochlorite. 10oz of granulated chlorine = 1/2 gallon of liquid pool chlorine = 1 gallon of household bleach. These measurements will raise the chlorine level by 5ppm in 10,000 gallons of water. Registered CPO (Certified Pool Operator) with the National Swimming Pool Federation http://www.nspf.com/ and maintaining public access swimming pools for many years (Pulled this from yahoo) http://answers.yahoo.com/question/index?qid=20070608193348AActO7L
128 liquid ounces in a gallon of water.
A gallon is liquid measure, a cucumber is solid
16 Cups
Chemicals used in hot tubs include Bromine or chlorine. Chlorine comes in granulated forms or a liquid. Another chemical used in hot tubs is sodium bromide.
Depends on how much is already in the pool and the concentration of the liquid chlorine. IF you are just staring out, try using a half a gallon and measure with an OTO tester after a couple of hours. You are shooting for a minimum level of 1 PPM chlorine and 7.2 pH. Hatawa
The weight of 1 liquid gallon of ink can vary depending on the type and brand of ink. On average, a liquid gallon of ink can weigh around 8-10 pounds.
1 US gallon equals 3,785 cc, and 1 imperial gallon equals 4,546 cc.
No. Five liters is equal to about 1.32 US gallons of liquid.