0
What else can I help you with?
To separate stereo audio signal from mono audio signal how can you do that?
If you have a mono signal then all stereo parts are gone and you really cannot get them back. The other way round is possible. You can add the left hand channel to the right hand channel and you get mono. like the guy said just reverse the left channel to right and right to left it will create a reveresed sound A.K.A mono. but why would you want to switch anyway? stereo is the peak of all speaker systems.
Comparison between ADC and DAC?
An ADC, or analog to digital decoder, is used to "translate" analog signals into digital signals. An analog signal can take on any value, such as 0.1V, 0.5V, 4.12V, 5V and so on. A digital signal on the other hand can either be "high" or "low", 1 or 0. A computer can only work with digital signals, and therefore you need to convert an analog signal into a digital signal in order for the computer to be able to work with it. This is what you do when you record sounds or music. Sound is an analog signal and had to be converted with an ADC to a digital signal before it can be used in a compter or stored on a CD. A DAC, or digital to analog decoder is the oposite of the ADC. Here the digital signal is converted into an analog signal. This is what happens when you play music from a CD-plate. On a CD there are a number of holes, which each translates as a 0 or 1. These are read with a laser beam which is reflected back into a receiver whenever the laserbeam hits a hole. This then counts as a 1. When the disk is spinning it produces a stream of 1s and 0s, which togerther form a binary string, such as 00010111011101. The DAC then converts this value into a analogue signal, such as 1.1V, which is then used to power your speaker and produce audible sound.
What is digital and analog?
we often confuse our-self with continuous time and analog signals. An analog signal is a signal which can take any amplitude in continuous range that is signal amplitude can take infinite values on the other hand a digital signal is one whose amplitude can take only finite numbers of values THE TERM CONTINUOUS SIGNAL AND DISCRETE SIGNAL CLASSIFY THE SIGNALS ALONG THE TIME (i.e. horizontal axis) where as THE TERM ANALOG AND DIGITAL SIGNAL CLASSIFY THE SIGNAL ALONG THE AMPLITUDE (i.e vertical axis)
What are the military warning signals?
There are several way of getting across a warning signal. For example, hand signals, alarms, and code phrases are good means of low-key communication.
In order to get maximum undistorted output signal from ce amplifier with vcc 10v the value of vce q should be approximately?
Voltage has nothing to do with it. THE LOAD LINE ON THE OTHER HAND HAS EVERYTHING TO DO WITH IT.
When You must give a signal either by hand and arm or by a signal device?
anytime you change lanes
When must you give a signal either by hand and arm or by a signal device?
anytime you change lanes
Should You give a signal either by hand and arm or by signal devices?
anytime you change lanes
What to do when signal lights are not working?
Either hand signal or check and replace your fuses and turn signal bulbs.
What electronics run software?
The software is either embedded in a device, such as a hand-held device or appliance, or installed on a computer.
What kind of a signal does a GPS give off?
Your hand-held GPS is a receiver. It listens to signals fromGPS satellites, and doesn't "give off" any signal of its own.
What is the difference between transmitter and gauge?
A transmitter is a device that converts a signal from a sensing device into a standardized output signal, typically a current or voltage signal. A gauge, on the other hand, is a device used to measure and display values such as pressure, temperature, or level. Transmitters provide a means to transmit the measured value to a monitoring/control system, while gauges simply display the measured value locally.
How can I effectively signal my turns while riding a bicycle using hand signals and turn signals?
To effectively signal your turns while riding a bicycle, use hand signals and turn signals. Extend your left arm straight out to signal a left turn, and your right arm straight out to signal a right turn. You can also use a bicycle-mounted turn signal device for added visibility. Remember to always check for traffic before making your turn.
What is a signal for an actor or actress to do or say something?
It is called a 'cue'. It is the last line of the preceding actor.
What is the corresponding hand signal for making a left turn?
What is the corresponding hand signal for making a left turn?
How do you put signal in a sentence?
i have no signal on my phone i have signal on my phone i have no signal on my television i have signal on m y television the signal has been interupted i dont know the hand signal i need to know the signal what is the signal strength teach me the hand signals what is the signal for danger i have little signal i have high signal i have no signal how much signal do i have how do i tell how much signal i have is there a sign for signal by the way you already put it in a sentence by asking a question lol
What is the device that produce gain active or passive?
Either. although a passive device can only produce gain from 0-1 (-inf to 0dB) an active device on the other hand is capable of producing gain thats greater than 1 (0dB)
