0
What else can I help you with?
How many psi in 6 bar?
36 pound per square inches is equivalent to 2.48 bars (2.5 bars)
What type of materiel is reinforced concrete?
a mixture of cement and water, reinforced by iron bars that run through it.
What is the standard spacing between steel bars in a concrete slab?
The standard spacing between steel bars in a concrete slab typically ranges from 12 to 18 inches, depending on the specific design requirements and load conditions. For residential applications, a common spacing is 16 inches on center. However, factors such as slab thickness, intended use, and local building codes can influence these dimensions. Always consult structural engineering guidelines or local regulations for precise specifications.
Are steel bars made in circles?
Steel companies make steel bars in circles
Where is the place of main bar in rectangular footing?
in a rectangular foundation long bars to be in bottom and short bar to be on top of long bars, where as in slab opposite to the foooting bars
How many 12 feet bars would equal 480 inches?
40 12-foot bars = 480 inches.
What is method of curtailment of steel bars in RCC column in multi storeyed building?
column curtailment details
How many kg gold bars equal 5000000?
5000000 gold bars equal 5000000!
What is a lattice column?
made of channels / angles connected by lattice bars.
What is lattice column?
made of channels / angles connected by lattice bars.
20 bars is equal to how many feet?
A bar is a measure of pressure while a foot is a measure of distance. Pressure can support a column of a specified substance and the length of that column can be used to as a measure of the pressure. However, no substance has been specified and so it is not possible to answer the question.
Does a title identify the data series or bars in a column chart?
No. A title is for the overall chart. A legend will identify the bars and series on it.
How many meters is equal to 20 bars?
You can't convert meters to bars, or bars to meters. The two are utterly incompatible. Meters is a unit of length, bars is a unit of pressure. if you mean depth of water then 20 bar = 200 metres (close)
Ten bar pressure is equal to how much depth in maters?
In water, every 10 meters you go down, the pressure increases by 1 bar, approximately. To this you must add the air pressure, which is also approximately 1 bar (depending on whether you want gauge pressure or absolute pressure).
What steel bars used in columns?
No of steel bars used in column should be more than of 12 mm torr, in case of rectangulr column it should be atleast 4 provided c/c/ dist betwwn two bars should NT xceed 300 mm
What is the equivalent to 15 bars of pressure?
15 bars is equal to (using google):
What size do gold bars come in?
12 inches
