0
The lathe is one of the engineers' most valuable tools. Coupled with a milling machine or milling head (Tri-axis lathe) there is nothing that cannot be produced from virtually any kind of material.A lathe can be used to:# Turn an ornate wooden spindle# Skim a cylinder head or other gasket-face# Put a screw-thread on a piece of metal bar# Drill a hole of almost any size in almost any material# Machine an intricate valve, collet or gudgeon# Put a screw-thread INSIDE a hole (Tap the hole)# Produce a complex component such as a cog-wheel, crown wheel or pinion# Re-bore the cylinder of an engine# Create irregular / offset flanged components of infinite complexity.# Turn-down a piece of tooling to fit a specific tool.The list is almost endless. There isn't much you cant do with a lathe, especially if it has a milling head! (Engineers wet dream!)
What else can I help you with?
What are the short comings of lathe machines?
what is lathe machine in short answer
What is the difference between lathe machine and drilling machine?
difference between lathe and drill machine doing full on piece of metal
What is profiling on lathe machine?
Vertical milling machine is for cutting large pieces. The lathe cutting tool motion is perpendicular to the ground. They are said to Karosl lathe.
What is the prize of lathe machine?
It can duplicate itself.
What is the difference between a metal lathe and a wooden lathe?
Milling in a lathe can be two things:A cutter is gripped in the chuck and a workpiece the the tool post. The work piece is then milled by using the feed on the lathe. Although it has been done, it is an unconventional method and is not recommended.A 3-in-1 lathe with a milling attachment as part of the machine used for milling a work piece.
What is feed in lathe in machine?
non- examples of feed in lathe machine?
What is difference between turning machine and lathe machine?
There is no difference between a turning machine and a lathe. They are two names for the same kind of machine
What are the short comings of lathe machines?
what is lathe machine in short answer
What is difference between lathe machine and drilling machine?
difference between lathe and drill machine doing full on piece of metal
What is the difference between lathe machine and drilling machine?
difference between lathe and drill machine doing full on piece of metal
What is profiling on lathe machine?
Vertical milling machine is for cutting large pieces. The lathe cutting tool motion is perpendicular to the ground. They are said to Karosl lathe.
What is imagination lathe?
lathe machine, power depends on the size and power of electric motor and gearbox lathe.
Who is father of lathe machine?
The lathe machine is an ancient tool, dating back to approximately 1300 BC. It was first developed as a two-person lathe by the Ancient Egyptians.
If you need a machine lathe to make a machine lathe then how was the first machine lathe made?
By hand. You can achieve incredible accuracy by hand, it just takes forever. Also lead screws made on the new lathe will be better than the hand filed one and so on...
Calculation formula for calculating machine hours?
lathe machine hour
What do you know about lathe machine attachments?
A lot.
Who is the inventor of lathe machine?
christopher solis
