The very similiar effect that causes a nuclear exposion, but not to that effect. The air is removed creating a vacuum but there cannot be empty space so the air stretches to fill the void. Now if the metal can is sturdy enough to hold up enough pressure, the air molecules will stretch so far that they split apart, therefore causing a nuclear explosion. Please don't try this.
Equal pressure inside us.
There is air pressure on all sides, inside or outside. The air pressure pushes on the object all ways and nothing falls. If you only apply pressure on the bottom then the object will lift. If you apply pressure on the top, the object will collapse. If air pressure is pushing side ways, the object will move sideways.
because the pressure is the same on the outside and inside of can making the can staying the same and not being crushed
The empty soda can is not sealed so air is free to enter and leave the can. As a result, pressure inside the can is the same as it is outside.
about 5000 thousand mm.
Air pressure can be used to crush a can by heating the can and then quickly cooling it, causing the air inside to contract and create a lower pressure than the air outside. The higher outside air pressure then crushes the can.
Air pressure can be used to crush a can by creating a difference in pressure inside and outside the can. When the can is heated and then quickly cooled, the air inside the can condenses, creating a lower pressure. The higher pressure outside the can then crushes it.
Yes it can. Depending on the range of air pressure between earth and space
When a can is crushed, the air pressure inside the can decreases, causing the higher air pressure outside the can to crush it.
a drinks can
Equal pressure inside us.
To crush a can using air pressure, you can heat the can with a heat source, then quickly submerge it in cold water. The rapid cooling causes the air inside the can to contract, creating a vacuum that crushes the can.
Air pressure can crush objects like a desk because the weight of the air above the object creates a force pushing down on it. As the air pressure increases, this force becomes stronger, causing the object to collapse under the weight.
To test the effects of air pressure on crushability, you could use a controlled environment like a pressure chamber where you gradually increase or decrease air pressure while measuring the force needed to crush an object. Start by creating a baseline measurement at normal air pressure, then apply different levels of pressure and record the force required to crush the object at each level. Analyze the data to observe how air pressure impacts crushability.
The air pressure is the same inside as outside the can.
There is air pressure on all sides, inside or outside. The air pressure pushes on the object all ways and nothing falls. If you only apply pressure on the bottom then the object will lift. If you apply pressure on the top, the object will collapse. If air pressure is pushing side ways, the object will move sideways.
It compresses the air in or around it making it crush into itself because the air around it is being compressed so tightly togetherit has to make room for itself.