About 6 lbs per gallon.
7.6 pounds/gallon
The oil should be greater than 100M Ohms resistance. If a flash over occurs within the transformer the oil has to be replaced
90 weight oil corresponds to SAE 90 oil, which means it has a viscosity rating of 90. The weight of the oil is measured in centistokes at 100°C, which helps to determine how thick or thin the oil is. However, the weight of the oil in pounds depends on the volume of oil you are referring to.
In order to convert from volume to weight, we must know the density. 15w40 has a density of about .879 kilograms per liter. One gallon is about 3.785 liters. Multiplying these two numbers gets us our weight, at approximately 3.327 kilograms.
The weight of a gallon of oil can vary depending on the type of oil. However, as a general estimation, most oils weigh around 7-8 pounds per gallon.
7.6 pounds/gallon
Its "Mineral Oil".
Its "Mineral Oil".
Mineral oil
It is mineral oil nafta or parafin based.
Transformer oil is a highly refined mineral oil.
Mineral oil
The oil should be greater than 100M Ohms resistance. If a flash over occurs within the transformer the oil has to be replaced
Probably not. Transformer oil is generally highly purified mineral oil, so unless you're getting it from shady sources, you should be fine.
Lower the rating of the primary fuse feeding the transformer.
2-3 times more than the cost of a mineral oil filled transformer.
69 pounds