34
3/4 of an inch = .75 inches.75 inches = 1.905 centimeters
wat the hell r u talking about?
7/16 inch is 11.1 (11.1125) mm
0.08" is a little over 1/16", is very close to 2mm. It is also the width of 12 gauge copper electrical wire.
1.77cm is about 3/4 inch.
No, 25th inch is smaller than 1/8th of an inch. 1/8th of an inch is equivalent to 3/24 inches or 3/32 inches, which is larger than 25th inch.
A 4th of an inch plus an 8th of an inch is 3/8 of an inch. This is the diameter of a "AA" battery.
1/8th inch is 3.175 mm
On bankstick etc its 3/8th of a inch BSF thread.
8 of them.
0.125
Check the 8th " character " of your VIN : ( .054 inch ) for " L " and " Z " engine codes ( .044 inch ) for "3" lightning ( .044 inch ) for "M" natural gas
1/8th per inch
125
It is three quarters of the way from the 3 inch mark towards the 4 inch mark. Imperial rulers are normally marked in 16th of an inch with the 4th and 12th marks slightly longer and the 8th even longer. The 4th mark is ¼, the 8th mark is ½ and the 12th mark is ¾; 3.75 inches is 3¾ inches so on such a ruler it is the 12th mark to the right of the 3, and will be slightly longer than the 3 marks either side of it.
( .054 inch ) for " L " and " Z " engine codes ( 8th " character " of VIN ) ( .044 inch ) for " M " ( natural gas ) and " 3 " ( lightning ) engine codes
1/8th of a cubic inch