1.Hold mode button until alarm time appears
2.push mode button one more time until seconds flash on current time
3.click adjust button to switch between minutes and hours
4.click alarm button to change hour or minute.
5.Click mode to exit "set" mode
no you can watch them over and over like a normal DVD
To change the time on an Accutime watch from Justice, first locate the crown (the knob on the side of the watch). Pull the crown out to the first or second position, depending on the model, to set the time. Turn the crown in either direction to adjust the hour and minute hands to the correct time. Once set, push the crown back in to secure the time.
build an absolute French monarchy
If a television has a built in broadcast television digital tuner it will be in the menu set up.
Change the time zone on your watch to ROME then set your watch to 12:58 am / 0:58 am then plub in your video watch wait one min until 12:59 am then uploadthe secret message
instructions for cardinal 3108 digital watch
How do I set the date on a cardinal watch?
depends on the watch.
To set the day on a digital W Cardinal watch, first, press and hold the "Mode" button until the display starts flashing. Use the "Adjust" or "Set" button to navigate to the day setting, then press the "Mode" button again to select it. Use the "Adjust" button to change the day, and finally, press the "Mode" button to save your settings and exit.
To set the chime on a Cardinal watch, first locate the crown on the side of the watch. Pull the crown out to the second or third position, depending on your model. Rotate the crown to adjust the chime settings, usually indicated by a series of clicks or a digital display. Push the crown back in to save your settings and activate the chime.
To set the date and weekday on a Cardinal watch, you typically need to pull the crown out to its second position (the time-setting position) and then rotate the crown to adjust the date and weekday display. Refer to your specific Cardinal watch's manual for detailed instructions as the process may vary depending on the model.
You pull out the crown once to change the date, twice the change the time
To set a Cardinal WR100M wristwatch, first, gently pull the crown out to the second position to stop the second hand. Then, turn the crown to set the time by rotating it until the hands display the correct time. Push the crown back in to start the movement again. If your watch has a date feature, pull the crown to the first position to adjust the date before setting the time.
to set the date on a cardinal watch,you simply use the mode button.You press and hold MODE for a few seconds and it gets you to the allarm the you press a few more sec to get to the time and the after settiong the time you press on ST/STP a few sec and it gets you to the date
To reset a Cardinal WR50M watch, first, pull the crown out to the second position. Then, press the reset button, usually located on the side of the watch, to reset the time or features. After making your adjustments, push the crown back in to set it in place. Make sure to check the watch's manual for specific instructions related to your model.
In order to set the time. 1.Keep light button pressed until you see SET coming on the digital screen. 2.Once you see that hit the reset button to set time now u can set time and date and year and alarm accordinigly
In order to watch digital channels one needs to first purchase a digital set top receiver box. These are relatively cheap nowadays and won't set you back more than $50 for a standard unit.