answersLogoWhite

0

5'8" from the floor to the CENTER of the BULLSEYE is the height. 7'9.25" from the FACE of the board is the throw line.

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Movies & Television

What is the regulation height of a dart board?

The height of a regulation dartboard is 5'8" from the center of the bullseye to the floor, with a toe line at 7' 9.5" inches from the front of the board for steel tip darts.


What is the Height of a Dart Board if your Widdy board says 5 ft 3 inches?

A dartboard manufactured by Widdy is an American style board, usually found around Philadelphia and that region. This is opposed to an English style board.An American board has both the double and triple scoring rings on the outside. It also has thin inlaid steel wires separating the sections. This differs from the English board that most people know, which has the double ring on the outside, and the triple ring halfway between the cork and outer ring. For an English style board, the official measure is "center of the bullseye is 5 feet 8 inches from the ground." However, for American style boards like your Widdy, 5'3" is the correct height. See this blowup:http://www.americanstyledarts.com/widdyDistanceBlowup.htmlthe height has the same measurements as the width.


What is standard conference table height?

It depends what kind of conference you are going to. If it is your average board meeting, the yey high. If it is a clown conference, then hey high, but if it is a dwarf conference, the you're best off just sitting on the floor.


Regulation dart board height?

The common US distance from throw line to face of board for soft tip darts is 8 feet. 7'-9.25 inches is for steel tip darts.


How do you hang a dart board in a cabinet?

First you need to buy or build a dart board cabinet. When you hang the dart board cabinet you want to make sure that when you put the dart board inside the bullseye is 5' 8" high.

Related Questions

What is the regulation height of a dart board?

The height of a regulation dartboard is 5'8" from the center of the bullseye to the floor, with a toe line at 7' 9.5" inches from the front of the board for steel tip darts.


What colour is the bullseye on a standard darts board?

The bullseye is red


Dart board height from floor?

The bullseye should be about 5 feet 8 inches from the ground. The throwing distance is also about 9 feet 9 inches.


Regulation height of a dart board?

5 feet 8 inches Standard height from the floor to the bullseye on the dartboard is 5 feet 8 inches, while the oche (distance between the front of the board and the toeline) should measure 7 feet 9.25inches.


What is the OSHA requirement for the height of a toe board?

A standard toe board shall be a minimum of four inches nominal in vertical height from its top edge to the level of the floor, platform, runway, or ramp.


What distance for darts?

From the throwing line to the surface of the board 2,37m (measured parallel to the ground). The height of the bullseye 1,73m.


How far does a woman stand from the oche in darts?

5 feet & 8 inches from the floor to the centre of the bullseye. 7Feet 9 and a quarter inches from the face of the board to the throw line or "oche" For Soft tip darts 8 feet from the face of the board to the throw line or "oche"


How big is a tri-fold poster board?

A standard tri-fold poster board typically measures 36 inches in width and 48 inches in height when fully opened. When folded, each panel is usually around 24 inches by 36 inches.


How wide is a dartboard?

A standard dartboard has a diameter of 18 inches (45.72 cm). This measurement is used for official competition dartboards, ensuring consistency in gameplay. The board is divided into various scoring sections, with the bullseye at the center measuring 4.5 inches (11.43 cm) in diameter.


What is the standard size of a deck ledger board?

The standard size of a deck ledger board is typically 2 inches by 10 inches.


What is the height of the monopoly game board?

The height of a standard Monopoly game board is approximately 1.5 inches (3.8 cm). This measurement can vary slightly depending on the specific edition of the game, but it generally maintains a similar height across most versions. The board is designed to be flat and easily portable for gameplay.


What is the center of a dart board called?

The center of a dart board is called the bullseye. It is typically worth the most points and is surrounded by the inner bullseye and outer bullseye.