How do you change the spark plugs on a 1998 350 clubwagon V10?

Answer 1

theres a cover hiding everythign that needs to be pulled off first. the fuel injectors might need to be turn a tad to work in there. each individual plug has a coil on top of it. you have to unblolt them and pull it out. it will have a rubber boot and a spring inside that might break off, but pull it all off. then unscrew the plug and repeat the process.

word to the wise : a mechanic told me if you disturb the coils they will cause the engine to miss fire so your better off waiting to change the plugs until the cylinder misfires, but all that need to be changed is the rubber boots and springs if it does miss

Answer 2

to change the spark plugs...they have a special tool you by and you pull the wires off then you stick the tool down inside and you unscrew them and the install the others!

on this vehicle you have to remove the coil pack on the back of the engine to get to the rear plugs to do this take the four bolts off the coil pack and simply move it out of the way to access the plugs

Answer 3

To change the spark plugs on a 1998 350 Clubwagon V10, you will need to locate the spark plugs under the hood, remove the ignition coil and spark plug wires, use a spark plug socket and ratchet to unscrew the old spark plugs, replace them with new ones, and reattach the ignition coil and spark plug wires in the correct order. It's important to follow the manufacturer's specifications for torque and gap settings when installing the new spark plugs.