ff
The forces acting on the weight lifter and the weights are balanced when the weight lifter is holding the weights stationary. The force exerted by the weight lifter is equal and opposite to the force of gravity acting on the weights.
To calculate the work done, we need to know the distance over which the weight lifter held the weight. If we assume the weight lifter held the weight steady at shoulder height (about 1.5 meters), the work done would be Weight x Height = 120 kg x 1.5 m = 180 Joules.
(using squats for the sake of explanation) The lifter exerts an action force on the weight, which is in the opposite direction to gravity. The lifters shoulders also experience the reaction force (from the weight - otherwise, the weight would pass through the lifter or vice versa). The feet of the lift also experience a reaction force, which, combined with the shoulder-reaction force, is equal to the action force (Newton's Third Law). The feet also experience friction on the floor surface in opposite directions (which cancel out, so the lifter is stationary on the ground) :)
The weight of a 115kg barbell is constant. The lifter's weight, however, will vary. If the lifter weighs less than 115kg, the barbell will be heavier relative to their weight. If the lifter weighs more than 115kg, the barbell will be lighter relative to their weight.
You need to provide energy to lift the weight. If the weight falls or otherwise goes down, the energy is freed again - for example, it can drive a motor for a short while. It is therefore convenient to consider that there is stored energy in the lifted weight. More accurately, the energy is stored in the relation between the two attracting objects - in this case, planet Earth, and the weight.
The forces acting on the weight lifter and the weights are balanced when the weight lifter is holding the weights stationary. The force exerted by the weight lifter is equal and opposite to the force of gravity acting on the weights.
a weight lifter has to have a surtain amount of fat to lift the weights and a ballet dancer has to be skinny and flexible
the Olympic Weight lifter because the weights are much heavier then the microphone
To calculate the work done, we need to know the distance over which the weight lifter held the weight. If we assume the weight lifter held the weight steady at shoulder height (about 1.5 meters), the work done would be Weight x Height = 120 kg x 1.5 m = 180 Joules.
no people of the same height have diffrent weights, a given height maps to more than one weight
(using squats for the sake of explanation) The lifter exerts an action force on the weight, which is in the opposite direction to gravity. The lifters shoulders also experience the reaction force (from the weight - otherwise, the weight would pass through the lifter or vice versa). The feet of the lift also experience a reaction force, which, combined with the shoulder-reaction force, is equal to the action force (Newton's Third Law). The feet also experience friction on the floor surface in opposite directions (which cancel out, so the lifter is stationary on the ground) :)
Mass can be measured in grams, not weight. The weight of 1 Imperial pint is approx 5.6 Newtons.
it is two feet and weights 11 lbs
The weight of a 115kg barbell is constant. The lifter's weight, however, will vary. If the lifter weighs less than 115kg, the barbell will be heavier relative to their weight. If the lifter weighs more than 115kg, the barbell will be lighter relative to their weight.
Zero
area = volume/height 565m3/20m = 28.25m2 weight = max stress * area 20MPa * 28.25m2 = 565 MN (mega newtons or 10^6 newtons
This is a rather deluxe set intended for the serious lifter. You will get 20 pair of dumbbells, ranging in weight from 55-100 lbs.