0
What else can I help you with?
How many liters does a hosepipe use?
The amount of water a hosepipe uses depends on its flow rate, which is measured in liters per minute or hour. To calculate the total amount of water used, you would need to know the flow rate and the duration the hosepipe is run.
How many liters are in an average size bath tub?
9180000 because the average bathtub holds approximately 270 liters
How many ounces are in 2 liters of water?
There are approximately 67.6 ounces in 2 liters of water.
A basin contains 1670 milliliters of water How many liters of water is in the basin?
There are 1.67 liters of water in the basin, as 1 liter is equal to 1000 milliliters.
1m3 equals how many liters?
There are 1000 liters in a cubic meter. If you have a water meter, to work out the cost per m3 add the cost of water per m3 (around £1) and the cost of sewage per m2 (around £1.5) give you your total cost per m3 (around £2.5). So a 6 liter toilet flush cost about 1.5 Pence. A 65 liter shower (around 5 min shower on a mains pressure mixer shower) will cost around 16.25 pence On your water meter the small dials are: x0.001 dial = 1 liters. x0.01 dial = 10 liters x0.1 dial = 100 liters (once this dial has clocked around to 10, that = 1000 liters or 1m3)
How many liters of water are used to have a shower?
It is over 9000 in a ten minute shower
How many liters of water would you use in one week if you use 19 liters of water per minute and you take a 4 minute shower every day?
532 liters
How many liters of water does an 8 minuet shower use?
An 8-minute shower typically uses between 60 to 80 liters of water, depending on the flow rate of the showerhead. Standard showerheads have a flow rate of about 9 to 12 liters per minute. By using a low-flow showerhead, water consumption can be reduced significantly, potentially lowering the total to around 48 to 64 liters for the same duration.
How many liters in a 30 second shower?
Depends what the Shower pressure is, also how much dirt is in the water and the size of the shower holes
How many liters of water come out of a tap in 1 minute?
15
How many cups does a 5 minute shower take?
A standard showerhead typically uses about 2.5 gallons of water per minute. Therefore, a 5-minute shower would use approximately 12.5 gallons. Since there are 16 cups in a gallon, this equates to about 200 cups of water for a 5-minute shower.
How many liters of water does a 4 minute shower use?
It mainly depends upon the showerhead. The original generation of showerheads typically dispensed 3.5 to 5.0 gallons per minute (gpm) which would be between 53 and 76 liters in 4 minutes. The first generation of water-saving showerheads dispensed about 2.2 to 2.5 gpm, which would be between 33 and 38 liters in 4 minutes. In the USA, federal law requires new showerheads to have a rate of 2.5 gpm or less. The newest generation of low-flow showerheads use new engineering technology to achieve rates as low as 1.5 gpm, which would be only 23 liters in 4 minutes. You can get the amount even lower by running the water for 1 minute to get wet, turning off the water while soaping up, then turning the water back on for 2 minutes of rinsing; so a 4 minute shower would only use water for 3 minutes, a 25% water savings.
How many liters of water is used in a shower?
It depends on both the amount of time and the type of shower head. It usually ranges from 20 to 160 liters of water for a ten minute shower. Edit: A typical shower will use about 160 liters of water. In addition, the average shower uses approximately 10.0022 liters of water per minute. (EarthCareCanada.com)
How many gallons of water do humas use when they take a ten minute shower?
Most modern shower heads (U.S.) are restricted to 2.0 gallons a minute or less, so a ten minute shower would use approx. 20 gal.
How many gallons of water per minute does a low flow shower head use?
About 1.25 gallons per minute.
Do you waste more water in a bath or a shower?
Shower, Shower heads can usually allow anywhere between 2.5 and 5 gallons of water a minute. Toilets can use this volume in a single flush. As most showers last longer than one minute the shower volume is considerably higher.
How many gallons does a 10 min shower take?
Most newer shower heads restrict water flow to around 3.5 gallons a minute max. . .this would equal around 35 gallons for a 10 minute shower
