they are two conditions
1. the incident ray , refracted ray and the normal all lie in the same plane. The refracted ray ant the incident ray are on opposite sides of the line that separates the two medium.
2. Light bends toward the normal when the speed of light in the second medium is less than the speed of light in the first medium. Light bends away from the normal when the speed of light in the second medium is greater.
Diffraction can occur in water when water waves encounter an obstacle or pass through a narrow opening, causing the waves to bend and spread out. This bending and spreading of the waves is known as diffraction, and it is a common phenomenon in water due to the wave nature of water molecules.
The width of the slit should be on the order of the wavelength of the light being used for diffraction in order to observe the diffraction pattern clearly. This is known as the single-slit diffraction condition. The size of the slit also affects the angular spread of the diffraction pattern.
Conditions of diffraction refer to the requirements that must be met in order for diffraction to occur, such as having a wave encounter an obstacle or aperture that is comparable in size to the wavelength of the wave. Additionally, the wave must be coherent and the path difference between different parts of the wave should be within half a wavelength to observe constructive interference.
Diffraction becomes less pronounced for bigger openings. This is because diffraction can only occur when the size of the opening is comparable to the wavelength of the wave. When the opening is larger, the diffraction effects become less significant.
The greatest amount of diffraction occurs when the size of the opening or obstacle is comparable to the wavelength of the wave. This is known as the principle of diffraction, where larger obstructions cause greater bending of the waves around them.
The angle of the first diffraction order is typically around 30 degrees.
Diffraction can occur in water when water waves encounter an obstacle or pass through a narrow opening, causing the waves to bend and spread out. This bending and spreading of the waves is known as diffraction, and it is a common phenomenon in water due to the wave nature of water molecules.
The width of the slit should be on the order of the wavelength of the light being used for diffraction in order to observe the diffraction pattern clearly. This is known as the single-slit diffraction condition. The size of the slit also affects the angular spread of the diffraction pattern.
Conditions of diffraction refer to the requirements that must be met in order for diffraction to occur, such as having a wave encounter an obstacle or aperture that is comparable in size to the wavelength of the wave. Additionally, the wave must be coherent and the path difference between different parts of the wave should be within half a wavelength to observe constructive interference.
Diffraction becomes less pronounced for bigger openings. This is because diffraction can only occur when the size of the opening is comparable to the wavelength of the wave. When the opening is larger, the diffraction effects become less significant.
The greatest amount of diffraction occurs when the size of the opening or obstacle is comparable to the wavelength of the wave. This is known as the principle of diffraction, where larger obstructions cause greater bending of the waves around them.
If heat is required for a reaction to occur, it is an endothermic reaction. Endothermic reactions absorb heat from their surroundings in order to proceed.
Diffraction will not occur when a light ray interacts with a smooth pane of glass. Diffraction is a phenomenon where light bends around obstacles or spreads out after passing through a narrow opening, but on a smooth pane of glass, the light will either be transmitted or reflected without undergoing diffraction.
Most diffraction occurs when the size of the obstacle or aperture is comparable to the wavelength of the wave. This is because diffraction is the bending of waves around obstacles or through openings, and the extent of bending is influenced by the size of the obstacle or aperture.
Diffraction does occur when light passes through a window, but the effect is typically minimal due to the small size of the window relative to the wavelength of light. The amount of diffraction is directly proportional to the size of the obstacle or aperture; since windows are relatively small compared to the wavelength of visible light, the diffraction effects are not easily observable.
In a plane diffraction grating, if the angle of diffraction is such that the minima due to diffraction component in the intensity distribution falls at the same positions of principal maxima due to interference component, then, that order of principal maxima will be missing or absent. For more information, please visit: http://www.theglobaltutors.com/theglobaltutors/Optics-Homework-Help/Spectra-Diffraction-Grating https://msk1986.files.wordpress.com/2010/12/unit-iii-diffraction.pdf
In a diffraction grating experiment, the relationship between the diffraction angle and the wavelength of light is described by the equation: d(sin) m. Here, d is the spacing between the slits on the grating, is the diffraction angle, m is the order of the diffraction peak, and is the wavelength of light. This equation shows that the diffraction angle is directly related to the wavelength of light, with a smaller wavelength resulting in a larger diffraction angle.