A= actually its fluid pressure and fluid pressure is any kind of fluid(gas,liquid,air,are all fluid. Fluid Pressure is any fluid that is exerted on the surface, to calculate fluid pressure divide the force by the area over which it is applied.
It is the pressure exerted by the fluids on the bottom and walls of the container which acts equally all directions
The forces that exist in fluids are caused by the mass and motion of the particles making up the fluid
the fluid pressure 10 ft under water is
Its the weight of the liquid above the point where you are measuring it, for instance at a depth of 100 feet, find the weight ( in pounds) of water of a column of cross sectional area 1 sq. in. by 100 feet high, this would represent the pressure in pounds per square inch ( PSI )
The force that causes turgor pressure is osmosis.
The ultimate source of fluid pressure in the body is the heart, whose pumping generates blood pressure.
There is hydrostatic pressure within the capillary pushing the fluid out because fluid will always flow from high pressure to low pressure. At the same time there is something called blood colloid osmotic pressure which is the formed elements and larger plasma components such as proteins drawing fluid back into the capillary lumen by osmosis. The end result is that nearly just as much fluid that is filtered out at one end is reabsorbed by the time it reaches the other end. This is known as Starlings Law of the capillaries.What little excess isn't reabsorbed by the capillary will be picked up and returned to the cardiovascular system through the lymphatic system.
The weight of the fluid. Pressure = force / area.
All of the forces exerted by the individual molecules in a fluid add together to make up the pressure exerted by the fluid
The water will boil when the fluid gets hot. Steam in the fluid will causes a loss of hydraulic pressure.
cavitation is caused when vapour pressure in the fluid in higher equal to the surrronding presure. in the case of centrifugal pump, when the hydraulic pressure (due to height) in the fluid falls below the vapour pressure of the fluid itself, cavitation wil occur.
Bad seal or excessive internal pressure
Heat, pressure, and chemical alteration due to hot fluid exchange.
Not so much spinning as pressure. The torque converter is full of fluid and true it does spin with the engine rpms. This spinning causes the fluid to be pushed through the tranny as the pressure of it opens various valves. If you have a clogged filter, it won't allow the proper flow of the fluid thus causing shift problems. That's about as simple an explanation I can give.
Voltage is the force that causes current to flow through a circuit. In a similar way it isn't pressure that flows through a pipe - it is the fluid flowing through a pipe due to a difference in pressure at the entry and exit of the pipe that causes the fluid to flow through, no pressure flowing through a pipe.
7th grade omg i rememer this!i hated it i wished my teach didnt teach us this
Yes, there is fluid pressure in the skeleton. However, fluid pressure is only in the exoskeleton, not the internal skeleton.
As the speed of a fluid increases, the pressure within the fluid decreases.
the fluid pressure 10 ft under water is