0
I'm not sure what you are referring to. Look at the photo in the link given below, this is of Watts Bar 1 which was the last plant commissioned in the US. This plant has two cooling towers, are these what you mean? These towers are simply to cool the condensed feedwater from the turbine condenser, by water/air heat exchange, and any visible vapor coming from such towers is just water vapor, nothing else.
Some early reactors such as the Windscale UK air cooled reactors did have tall chimneys (they are called stacks by the plant engineers) to carry the discharge air clear, and they also had filters at the top. These reactors were similar to the Hanford reactors used in the early days in the Manhattan Project, but nobody builds such reactors now.
Gas cooled reactors such as the magnox and AGR in the UK have blowdown stacks, these are to blowdown the CO2 coolant on occasions for maintenance.
Plants with emergency diesel generators have exhaust stacks for the engine exhausts, you may have seen those.
If none of the above answer your query, try to be more descriptive of what you have in mind.
What else can I help you with?
Why factories have long chimneys?
Factories have long chimneys to release pollutants, such as smoke and gases, produced during the manufacturing process high into the atmosphere. This helps disperse the pollutants over a larger area, reducing their impact on the immediate surroundings and minimizing exposure to harmful emissions for nearby communities. Additionally, taller chimneys can create stronger upward drafts to improve air circulation and prevent pollutants from settling close to the ground.
Objectives of the factories act 1948?
•To ensure adequate safety measures and to promote the health and welfare of the workers employed in factories. •To prevent haphazard growth of factories through the provisions related to the approval of plans before the creation of a factory. •To regulate the working condition in factories, regulate the working hours, leave, holidays, overtime, employment of children, women and young persons. •Scope and coverage •Regulates working condition in factories. •Basic minimum requirements for ensuring safety, health and welfare of workers.
Are fake clothes made in the same factory place as real ones?
While no type of clothing is guaranteed to be made in a factory that is safe and fair to employees, fake clothing is much more likely to be manufactured in sweatshops. This is because there is no public to answer to for the conditions.
Which one of benjerman Franklins inventions protected us from lightning?
Benjamin Franklin's invention of the lightning rod helped protect structures from being damaged by lightning strikes. The rod functioned by attracting lightning strikes and safely redirecting the electrical charge to the ground, thus preventing fires and other damage.
How electricity distributed to factories?
Electricity is distributed to factories through power lines and substations that are connected to the factory's electrical infrastructure. The electricity flows from the power plant through the grid to the factory, where it is then distributed to various parts of the facility for use in powering machinery and equipment. Sophisticated systems are in place to ensure a reliable and efficient supply of electricity to factories.
What is the need for tall chimneys for big factories?
They have tall chimneys to compensate for their tiny penises.
How can tall chimneys help with smoke?
It is a matter of common observation that furnaces in various factories are provided with very tall chimneys. Fresh air is drawn through a hole near the bottom end of furnace ,while smoke (being hot ) is driven out through the chimneys If the chimneys is removed flame cannot sustain properly .Moreover ,the temperature of the furnace in that case be lesser .
Why do you see long chimneys in factory?
Many factories produce 'nasty' chemicals as waste products. Tall chimneys 'push' the noxious smoke high into the air - above people's heads etc. The natural wind movement dilutes and dissipates the smoke.
What is another name for tall chimneys?
smokestacks
Why the chimney of a big mill very tall?
The chimneys or smoke stacks from factories and mills were made very tall to keep the smoke from choking everyone in the nearby area. With a taller chimney the smoke would usually dissipate before it hit the ground.
Why do factories line their chimneys with limestone?
Factories might line their chimneys with limestone to help neutralize acidic gases released during combustion, reducing air pollution. Limestone can also capture some pollutants and prevent them from being released into the atmosphere.
What jobs did children do in Victorian times?
Boys would have worked on farms and in chimneys but girls worked in sewing factories.
Why are furnaces provided with tall chimneys?
find out your self stupid homosexual
Why is it preferable to have tall chimneys in factories and houses?
For 3 reasons: 1/ Simple chimneys take the smoke away from a fire because the warm air inside them rises; taller chimneys have more height for this to happen so work better. This explains 10' chimneys sticking above single story houses but not really big modern industrial chimneys; it would be much cheaper to use a fan! (Early industrial chimneys were built for this reason before mechanical ventilation was economic.) 2/ Various eddies and back drafts happen around house roofs on windy days. These can blow blasts of smoke back down the chimney into a house. Having the chimney a bit above the surrounding roofs considerably reduces this. This is why chimneys tend to stick at least 3' above the roof even on tall buildings. 3/ Probably the most important reason is pollution. Certainly this is the reason for really big modern industrial chimneys. By releasing the nasty gases that come out of chimneys at great height they will have mixed with a lot of air and should be at "safe" levels by the time they get back to ground level and people breath them in. This doesn't stop pollution of the wider area or planet but it does avoid the problem of extreme air pollution at the outlet point.
Why factories have long chimneys?
Factories have long chimneys to release pollutants, such as smoke and gases, produced during the manufacturing process high into the atmosphere. This helps disperse the pollutants over a larger area, reducing their impact on the immediate surroundings and minimizing exposure to harmful emissions for nearby communities. Additionally, taller chimneys can create stronger upward drafts to improve air circulation and prevent pollutants from settling close to the ground.
What is the plural word for chimneys?
The plural form of the noun chimney is chimneys. The plural possessive form is chimneys'.
What is a famous landmark in ridge and valley region?
seven tall, gray stone towers called natural chimneys
