answersLogoWhite

0

When your engine's stopped running the fan should come on or stay on to cool the engine down,it should stop when it reaches the correct temperature which is set by the switch, located near top of fan. If the fans coming on as soon as you put ignition key in, it sounds like the switch is faulty.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How do I diconect the torque converter on my 1995 Pontiac transport van I have found the wiring but do not know what wire it is?

The van wont run right without it, i disconnected mine and it would run without it connected. i thought it was bad because it was surging and cutting out around 45-50mph and wouldn't stay in overdrive, turned out to be a bad ignition coil. if that's your problem start with the coil packs.


What will happen to the two lights in a parallel circuit when one of the wires is disconnected?

If one of the wires in a parallel circuit is disconnected, the two lights will remain lit because each light has its own separate path for current flow. This is because in a parallel circuit, the components are connected across the same voltage source but have individual branches for current to flow.


Why has the key fob disabled after replacing the alternator in a W reg 2000 clio?

Because battery was disconnected. Im not an expert but most keys systems work by the car and key in synchronization. The norm to calibrate is to insert key into the ignition, switch on ignition and hold the lock key for 10 seconds give or take (Could be 15 or something). You may need to hold the blipper when turning ignition.


Does a 93 jeep Cherokee have a vtss system and if so can it be dis-connected?

Short communication line to ground (with ignition off) and try to start the engine. It should be impossible because PCM is not getting the VTSS message from the BCM. Remove short from line and turn ignition on. With ignition on short communication line again. Done.


How do you repair the check engine light in your 1997 Bonneville SE because it does not light when cranking engine?

The CE light should come on when you turn on the ignition without trying to start the engine. If it does not, then more than likely the bulb is burned out or is disconnected.


My iPod froze and I've looked at everything i disconnected it from my computer while it was synchronizing because my comp froze and now it says connected and it wont go away.?

ide personally reboot your comp with your ipod plugged in then see what happens!!


What could be the reason a man is so disconnected?

A man could be disconnected because of the continues fear. He might also be used to living alone.


An object in circular motion is constantly acceleratingtrue or false?

True. It is accelerating because the velocity constantly changes. The velocity constantly changes because the direction changes - and a velocity is made up of a magnitude, and a direction.True. It is accelerating because the velocity constantly changes. The velocity constantly changes because the direction changes - and a velocity is made up of a magnitude, and a direction.True. It is accelerating because the velocity constantly changes. The velocity constantly changes because the direction changes - and a velocity is made up of a magnitude, and a direction.True. It is accelerating because the velocity constantly changes. The velocity constantly changes because the direction changes - and a velocity is made up of a magnitude, and a direction.


Can 'permanently' be a synonym for 'constantly'?

No, because permanently is "always" and constantly is "again and again" but constantly does not mean permanently


Why would guys constantly email you?

because they constantly want to talk to you


Why is the atmosphere constantly changing?

The atmosphere is constantly changing because of pollution and global warming.


On meez why is avatars keep on getting disconnected?

BECAUSE, you'r computer hates you