Liquified Petroleum Gas (LPG)

The flame temperature of LPG (liquefied petroleum gas) can vary, but typically ranges from 1,980°C to 2,000°C (3,596°F to 3,632°F) in a well-ventilated environment. This high temperature makes LPG suitable for various heating and cooking applications.

The calorific value of one liter of LPG (liquefied petroleum gas) is approximately 24,000 kilojoules per liter. This high energy content makes LPG an efficient fuel for various applications such as heating, cooking, and transportation.

In LPG (liquefied petroleum gas), the propane and butane gases are the solutes, which are dissolved in the solvent of liquid butane. The propane and butane gases are the components that can dissolve in the liquid butane, making up the composition of LPG.

I'm going to assume you mean Liquid Propane Gas (or LPG in the US) even though this question first started with PLG -- a very rare acronym here. First, LPG liquidizes because it's under pressure. Releasing that pressure with any degree of suddenness with superchill whatever it comes into contact with (see Boyle's Law), so freezing injuries can occur. Secondly propane gas is highly flamable, so there's a serious fire hazard. Sudden ignition in an inclosed space can result in an explosion as well. Thirdly, in a confined space, propane, which has a higher specific gravity than oxugen, can displace oxygen in a confined space, thus creating a hypoxia hazard. Fourth, any compressed gas presents a kinetic hazard in that the pressure differential between ambient and compressed gas can cause kinetic trauma.

LPG, or liquefied petroleum gas, is a mixture, not a solution. It is a mixture of propane and butane, with one concentration being higher depending on the season.

Varieties of LPG bought and sold include mixes that are primarily propane, mixes that are primarily butane, and the more common, mixes including both propane (60%) and butane (40%), depending on the season---in winter more propane, in summer more butane. Propylene and butylenes are usually also present in small concentration. A powerful odorant, ethanethiol, is added so that leaks can be detected easily. The international standard is EN 589

In the context of LPG (liquefied petroleum gas), the solute is the gaseous hydrocarbons (such as propane and butane) that make up the LPG, while the solvent is typically not applicable as LPG is a mixture of these hydrocarbons without a separate solvent.

The liquid density of LPG (liquefied petroleum gas) can vary but is typically around 0.52 grams per cubic centimeter. This density is lower than that of water, which has a density of 1 gram per cubic centimeter.

The density of domestic LPG in gaseous form is 2.155 kilograms per cubic meter. Its density in liquid form is 553 kilograms per cubic meter.

Liquefied Petroleum Gas or LPG is a mixture of various hydrocarbons. It has a density of 1.9 kg/m3 to 2.1 kg/m3.

LPG stands for Liquefied Petroleum Gas, which means that it is a gas which has been compressed to liquid in cylinders. For more info, go this website: http://en.wikipedia.org/wiki/Liquefied_petroleum_gas

The volume of 1 kg of LPG (propane) is approximately 0.54 liters at room temperature and atmospheric pressure. Keep in mind that the volume can vary slightly depending on the specific properties of the LPG mixture.

The density of LPG (liquefied petroleum gas) can vary depending on the specific composition of the gas, but it is typically around 540 kg/m^3 at 25°C. This makes LPG heavier than air, which is why it settles at ground level if leaked.

There are 1,000 liters of LPG (or any other material) in a cubic meter.

4.2 pounds at 60 degrees F. 4.2 pounds at 60 degrees F.

Yes, 1 cubic meter of LPG is equal to approximately 1000 liters of LPG at standard temperature and pressure. However, the exact conversion may vary slightly depending on factors such as temperature and pressure.

The flammable limits for LPG (liquefied petroleum gas) are approximately 2% to 10% by volume in air. Below 2%, there is not enough fuel to sustain combustion, and above 10%, the mixture is too rich to ignite. Operating within these limits is crucial for safe handling and use of LPG.

The calorific value of LPG (liquefied petroleum gas) is approximately 46.1 MJ/kg (megajoules per kilogram). This high calorific value makes LPG a popular choice for heating, cooking, and other energy applications.

Because it's stored under pressure, all pressurised gas containers are cylindrical or spherical to eliminate corners which would be the weakest point.

---------------------------------------------------------------------------------------------------------

A sphere is a very strong structure. The even distribution of stresses on the sphere's surfaces, both internally and externally, generally means that there are no weak points. That's why a drop of water forms a spherical shape when under free fall, in short, it achieves a shape where all the resultant stresses neutralize when no external force(gravity) is acting on it. Moreover, they have a smaller surface area per unit volume than any other shape of vessel. This means, that the quantity of heat transferred from warmer surroundings to the liquid in the sphere, will be less than that for cylindrical or rectangular storage vessels. Thus less pressurization due to external heat.

Bhaumick...

The weight of LPG (liquefied petroleum gas) per liter varies depending on the specific type of LPG being used. On average, the weight of LPG ranges from about 0.52 to 0.58 kilograms per liter.

The Reid vapor pressure of LPG (liquefied petroleum gas) typically ranges from 100 to 200 psi (pounds per square inch) at 100°F. Reid vapor pressure is a measure of the volatility of a fuel, indicating its tendency to evaporate.

Depnds on several things including the gas mix, density and temperature but my best guestimate would be around 750 litres

A chemical compound called ethyl mercaptan is added to LPG to give it a distinct smell, also known as odorant. This odorant is added as a safety measure so that leaks can be easily detected by people through the characteristic smell.

The density of LPG containing 70% propane and 30% butane would depend on the specific composition and temperature of the mixture. Generally, LPG has a density range of 0.51 to 0.58 grams per cubic centimeter.